[PATCH] ARM: sun8i: Add Parrot Board DTS

Quentin Schulz quentin.schulz at free-electrons.com
Mon Jun 13 03:15:30 PDT 2016

The Parrot Board is an evaluation board with an Allwinner R16 (assumed
to be close to an Allwinner A33), 4GB of NAND, 512MB of RAM, USB host
and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2
controllable buttons, an LVDS port with separated backlight and
capacitive touch panel ports, an audio/microphone jack, a camera CSI
port, 2 sets of 22 GPIOs and an accelerometer.

This patch requires patches named "[v3] regulator: axp20x: Add support
for the (external) drivebus regulator" and "[PATCH 3/4] ARM: dts:
axp22x.dtsi: Add reg_drivebus node" from Hans de Goede or the micro USB
port would not be powered.

Quentin Schulz (1):
  ARM: sun8i: Add Parrot Board DTS

 arch/arm/boot/dts/Makefile             |   1 +
 arch/arm/boot/dts/sun8i-r16-parrot.dts | 333 +++++++++++++++++++++++++++++++++
 2 files changed, 334 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-r16-parrot.dts


More information about the linux-arm-kernel mailing list