[PATCH] ARM: dts: imx6qdl-sabresd: Remove regulators under 'simple-bus'

[Shawn Guo]

On Sat, Jun 11, 2016 at 06:49:16PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> Device-tree folks do not like the idea of placing regulators nodes
> under 'simple-bus'.
> 
> Move them out of 'simple-bus'.
> 
> Also use the convention: reg_xxxx: regulator-xxxx
> for the regulator names.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

If you would like to do this, please do it in a single patch to convert
all i.MX dts files over to the new style.

Shawn

> ---
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 78 +++++++++++++++-------------------
>  1 file changed, 34 insertions(+), 44 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 5248e7b..8453721 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -22,53 +22,43 @@
>  		reg = <0x10000000 0x40000000>;
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		reg_usb_otg_vbus: regulator at 0 {
> -			compatible = "regulator-fixed";
> -			reg = <0>;
> -			regulator-name = "usb_otg_vbus";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			gpio = <&gpio3 22 0>;
> -			enable-active-high;
> -			vin-supply = <&swbst_reg>;
> -		};
> +	reg_usb_otg_vbus: regulator-usb-otg-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio3 22 0>;
> +		enable-active-high;
> +		vin-supply = <&swbst_reg>;
> +	};
>  
> -		reg_usb_h1_vbus: regulator at 1 {
> -			compatible = "regulator-fixed";
> -			reg = <1>;
> -			regulator-name = "usb_h1_vbus";
> -			regulator-min-microvolt = <5000000>;
> -			regulator-max-microvolt = <5000000>;
> -			gpio = <&gpio1 29 0>;
> -			enable-active-high;
> -			vin-supply = <&swbst_reg>;
> -		};
> +	reg_usb_h1_vbus: regulator-usb-h1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_h1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 29 0>;
> +		enable-active-high;
> +		vin-supply = <&swbst_reg>;
> +	};
>  
> -		reg_audio: regulator at 2 {
> -			compatible = "regulator-fixed";
> -			reg = <2>;
> -			regulator-name = "wm8962-supply";
> -			gpio = <&gpio4 10 0>;
> -			enable-active-high;
> -		};
> +	reg_audio: regulator-audio {
> +		compatible = "regulator-fixed";
> +		regulator-name = "wm8962-supply";
> +		gpio = <&gpio4 10 0>;
> +		enable-active-high;
> +	};
>  
> -		reg_pcie: regulator at 3 {
> -			compatible = "regulator-fixed";
> -			reg = <3>;
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&pinctrl_pcie_reg>;
> -			regulator-name = "MPCIE_3V3";
> -			regulator-min-microvolt = <3300000>;
> -			regulator-max-microvolt = <3300000>;
> -			gpio = <&gpio3 19 0>;
> -			regulator-always-on;
> -			enable-active-high;
> -		};
> +	reg_pcie: regulator-pcie {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pcie_reg>;
> +		regulator-name = "MPCIE_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio3 19 0>;
> +		regulator-always-on;
> +		enable-active-high;
>  	};
>  
>  	gpio-keys {
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel