[PATCH 07/13] ARM: dts: r8a7792: initial SoC device tree

[Sergei Shtylyov]

On 06/10/2016 11:42 PM, Geert Uytterhoeven wrote:

>>    The only problem I'm seeing (again) is the RCAN clock failing to
>> register:
>>
>> rcar_gen2_cpg_clocks_init: failed to register cpg_clocks rcan clock (-12)
>>
>>    I was going to look at it yesterday but (wrongly) thought it somehow
>> cured itself... I'll look at it now.
>
> The RCAN parent is the second clock in the CPG node's "clocks" property,
> which you didn't provide.

    Actually, the things are more complex. The figure 7.1c suggests that the 
RCAN clock has different parent on R8A7792 than on the other SoCs -- namely 
PLL1/VCO 1/4. That may be, since there's just no USB_EXTAL signal on this SoC 
(it doesn't seem to support any USB IPs). Which means the 'clk-rcar-gen2' 
driver can't work with the RCAN clock in its current form.

> Gr{oetje,eeting}s,
>
>                         Geert

MBR, Sergei