[PATCH v7 2/3] documentation: Add secure monitor binding documentation
Carlo Caione
carlo at caione.org
Fri Jun 10 12:44:10 PDT 2016
From: Carlo Caione <carlo at endlessm.com>
Add the binding documentation for the Amlogic secure monitor driver.
Signed-off-by: Carlo Caione <carlo at endlessm.com>
---
.../bindings/firmware/meson/meson_sm.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..d017675
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,27 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+ firmware {
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+ };
+ };
+
+Example of the node using the secure monitor:
+
+ efuse: efuse {
+ compatible = "amlogic,meson-gxbb-efuse";
+ secure-monitor = <&sm>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ...
+ };
+
--
2.7.4
More information about the linux-arm-kernel
mailing list