[PATCH v4 2/4] phy-sun4i-usb: Add support for peripheral-only mode
Hans de Goede
hdegoede at redhat.com
Fri Jun 10 12:02:52 PDT 2016
Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode
from the musb controller node instead of assuming that having an id_det
gpio means otg mode, and not having one means host mode.
Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det
helper which looks at the dr_mode, always registering our extcon and
always monitoring vbus.
If dr_mode is not specified in the dts, do not register phy0 as we then
do not know how to treat it. This is actually a good thing as this means
we will not be registering phy0 on devices where the otg controller is
not enabled in the devicetree.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
Changes in v2:
-Adjust for of_usb_get_dr_mode_by_phy now taking an args0 parameter
Changes in v3:
-Only toggle the phy vbus-det bit on id-change on systems without vbus-det
when in otg mode
Changes in v4:
-No changes
---
drivers/phy/phy-sun4i-usb.c | 68 ++++++++++++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index bae54f7..e3cbaae 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -40,6 +40,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/usb/of.h>
#include <linux/workqueue.h>
#define REG_ISCR 0x00
@@ -109,6 +110,7 @@ struct sun4i_usb_phy_cfg {
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
+ enum usb_dr_mode dr_mode;
struct mutex mutex;
struct sun4i_usb_phy {
struct phy *phy;
@@ -119,6 +121,7 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
+ int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@@ -285,16 +288,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);
- if (data->id_det_gpio) {
- /* OTG mode, force ISCR and cable state updates */
- data->id_det = -1;
- data->vbus_det = -1;
- queue_delayed_work(system_wq, &data->detect, 0);
- } else {
- /* Host only mode */
- sun4i_usb_phy0_set_id_detect(_phy, 0);
- sun4i_usb_phy0_set_vbus_detect(_phy, 1);
- }
+ /* Force ISCR and cable state updates */
+ data->id_det = -1;
+ data->vbus_det = -1;
+ queue_delayed_work(system_wq, &data->detect, 0);
}
return 0;
@@ -319,6 +316,19 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
return 0;
}
+static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
+{
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ case USB_DR_MODE_HOST:
+ return 0;
+ case USB_DR_MODE_PERIPHERAL:
+ default:
+ return 1;
+ }
+}
+
static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
{
if (data->vbus_det_gpio)
@@ -414,7 +424,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct phy *phy0 = data->phys[0].phy;
int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
- id_det = gpiod_get_value_cansleep(data->id_det_gpio);
+ if (phy0 == NULL)
+ return;
+
+ id_det = sun4i_usb_phy0_get_id_det(data);
vbus_det = sun4i_usb_phy0_get_vbus_det(data);
mutex_lock(&phy0->mutex);
@@ -430,7 +443,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough for
* the musb-ip to end the current device session.
*/
- if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(200);
sun4i_usb_phy0_set_vbus_detect(phy0, 1);
@@ -456,7 +470,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
* without vbus detection report vbus low for long enough to
* the musb-ip to end the current host session.
*/
- if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
+ if (data->dr_mode == USB_DR_MODE_OTG &&
+ !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
mutex_lock(&phy0->mutex);
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(1000);
@@ -501,7 +516,8 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] >= data->cfg->num_phys)
+ if (args->args[0] < data->first_phy ||
+ args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -575,13 +591,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- /* vbus_det without id_det makes no sense, and is not supported */
- if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) {
- dev_err(dev, "usb0_id_det missing or invalid\n");
- return -ENODEV;
- }
-
- if (data->id_det_gpio) {
+ data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
+ switch (data->dr_mode) {
+ case USB_DR_MODE_OTG:
+ /* otg without id_det makes no sense, and is not supported */
+ if (!data->id_det_gpio) {
+ dev_err(dev, "usb0_id_det missing or invalid\n");
+ return -ENODEV;
+ }
+ /* fall through */
+ case USB_DR_MODE_HOST:
+ case USB_DR_MODE_PERIPHERAL:
data->extcon = devm_extcon_dev_allocate(dev,
sun4i_usb_phy0_cable);
if (IS_ERR(data->extcon))
@@ -592,9 +612,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to register extcon: %d\n", ret);
return ret;
}
+ break;
+ default:
+ dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
+ data->first_phy = 1;
}
- for (i = 0; i < data->cfg->num_phys; i++) {
+ for (i = data->first_phy; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
--
2.7.4
More information about the linux-arm-kernel
mailing list