[PATCH 2/2] ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Fri Jun 10 02:38:35 PDT 2016
This patch move sdcc3 pinctrl nodes out of board file, so that
other boards do not duplicate the same thing.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 20 ++++++++++++++++++++
.../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 22 +---------------------
2 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index ca683e5..6b801e7 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -27,6 +27,26 @@
};
};
+ sdcc3_pins: sdcc3-pin-active {
+ clk {
+ pins = "sdc3_clk";
+ drive-strengh = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc3_data";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+ };
+
ps_hold: ps_hold {
mux {
pins = "gpio78";
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 93d08b9..ebd675c 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -71,26 +71,6 @@
};
- sdcc3_pin_a: sdcc3-pin-active {
- clk {
- pins = "sdc3_clk";
- drive-strengh = <8>;
- bias-disable;
- };
-
- cmd {
- pins = "sdc3_cmd";
- drive-strengh = <8>;
- bias-pull-up;
- };
-
- data {
- pins = "sdc3_data";
- drive-strengh = <8>;
- bias-pull-up;
- };
- };
-
sdcc3_cd_pin_a: sdcc3-cd-pin-active {
pins = "gpio26";
function = "gpio";
@@ -407,7 +387,7 @@
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+ pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
};
};
--
2.8.3
More information about the linux-arm-kernel
mailing list