[PATCH V3 3/4] ARM: dts: mxs: Add Creative X-Fi3 support
Marek Vasut
marex at denx.de
Thu Jun 9 12:43:12 PDT 2016
From: Marek Vasut <marek.vasut at gmail.com>
Add support for this small MP3 player based on STMP3780 (rev.4).
Currently supported is both external microSD and internal SD-NAND
bridge, PWM and USB gadget.
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Shawn Guo <shawnguo at kernel.org>
---
V2: - Fix the button nodes to not generate possible DT warning
- Drop the address part from the license
V3: - Reorder the tags from ARM: mxs: dts: to ARM: dts: mxs:
- Move regulator node
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx23-xfi3.dts | 179 +++++++++++++++++++++++++++++++++++++++
2 files changed, 180 insertions(+)
create mode 100644 arch/arm/boot/dts/imx23-xfi3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 488a943..b287fa8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -418,6 +418,7 @@ dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
+ imx23-xfi3.dtb \
imx28-apf28.dtb \
imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
new file mode 100644
index 0000000..025cf94
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut at gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+ model = "Creative ZEN X-Fi3";
+ compatible = "creative,x-fi3", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb at 80000000 {
+ apbh at 80000000 {
+ ssp0: ssp at 80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
+ vmmc-supply = <®_vddio_sd0>;
+ cd-inverted;
+ status = "okay";
+ };
+
+ ssp1: ssp at 80034000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_4bit_pins_a>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+ };
+
+ pinctrl at 80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog at 0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_GPMI_D07__GPIO_0_7
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ key_pins_a: keys at 0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_ROTARYA__GPIO_2_7
+ MX23_PAD_ROTARYB__GPIO_2_8
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+ };
+ };
+
+ apbx at 80040000 {
+ i2c: i2c at 80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_a>;
+ status = "okay";
+ };
+
+ pwm: pwm at 80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial at 80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ auart1: serial at 8006e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_2pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy at 8007c000 {
+ status = "okay";
+ };
+
+ lradc at 80050000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb at 80080000 {
+ usb0: usb at 80080000 {
+ dr_mode = "peripheral";
+ status = "okay";
+ };
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 7 0>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ voldown {
+ label = "volume-down";
+ linux,code = <114>;
+ gpios = <&gpio2 7 0>;
+ debounce-interval = <20>;
+ };
+
+ volup {
+ label = "volume-up";
+ linux,code = <115>;
+ gpios = <&gpio2 8 0>;
+ debounce-interval = <20>;
+ };
+ };
+};
--
2.7.0
More information about the linux-arm-kernel
mailing list