[PATCH v2 1/2] ARM: dts: TS-4800: add FPGA's IRQ controller support

[Damien Riegel]

Enable FPGA's IRQ controller. It is in charge of dispatching interrupts
generated by IPs in the FPGA. The SoC is notified that an interrupt
occurred through a GPIO.

Signed-off-by: Damien Riegel <damien.riegel at savoirfairelinux.com>
---
Changes in v2:
 - Remove new lines
 - Use hyphen rather than underscore in node name
 - Get rid of "0," in unit-address
 - Move node to keep them sorted by unit-address

 arch/arm/boot/dts/imx51-ts4800.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 0ff76a1..0e80fb7 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -165,6 +165,17 @@
 			reg = <0x12000 0x1000>;
 			syscon = <&syscon 0x10 6>;
 		};
+
+		fpga_irqc: fpga-irqc at 15000 {
+			compatible = "technologic,ts4800-irqc";
+			reg = <0x15000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_interrupt_fpga>;
+			interrupt-parent = <&gpio2>;
+			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
 	};
 };
 
@@ -228,6 +239,12 @@
 		>;
 	};
 
+	pinctrl_interrupt_fpga: fpgaicgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__GPIO2_9		0xe5
+		>;
+	};
+
 	pinctrl_lcd: lcdgrp {
 		fsl,pins = <
 			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-- 
2.5.0