[PATCH 03/12] mmc: tegra: restrict the voltage_switch() callback to the 1.8V case

[Lucas Stach]

Am Donnerstag, den 09.06.2016, 09:10 +0200 schrieb Gregory CLEMENT:
> Given its name the voltage_switch() should be called for any
> voltage. However currently it is only called for the 1.8V case.
> 
> That means that the current implementation of the callback could have
> made this assumption. In order to not adding a regression when the
> voltage_switch() function will be called for the other voltage
> targets,
> this patch ensure that the code of the current callback won't be
> executed
> for the other case than 1.8V.
> 
This isn't necessary, it's fine to re-execute the pad calibration for
any voltage switch.

Regards,
Lucas

> Cc: Lucas Stach <dev at lynxeye.de>
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> ---
>  drivers/mmc/host/sdhci-tegra.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-
> tegra.c
> index bcc0de47fe7e..01f58296125e 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -302,6 +302,10 @@ static void tegra_sdhci_voltage_switch(struct
> sdhci_host *host)
>  	struct sdhci_tegra *tegra_host =
> sdhci_pltfm_priv(pltfm_host);
>  	const struct sdhci_tegra_soc_data *soc_data = tegra_host-
> >soc_data;
>  
> +	/* initially this function was called only for the 1.8V case
> */
> +	if (host->mmc->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_180)
> +		return;
> +
>  	if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
>  		tegra_host->pad_calib_required = true;
>  }