[PATCH v2 08/13] regulator: pwm: Adjust PWM config at probe time

Boris Brezillon boris.brezillon at free-electrons.com
Wed Jun 8 09:34:43 PDT 2016


The PWM attached to a PWM regulator device might have been previously
configured by the bootloader.
Make sure the bootloader and linux config are in sync, and adjust the PWM
config if that's not the case.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Acked-by: Mark Brown <broonie at kernel.org>
Acked-by: Brian Norris <briannorris at chromium.org>
Tested-by: Brian Norris <briannorris at chromium.org>
---
 drivers/regulator/pwm-regulator.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index ab3cc02..524b43f 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -285,11 +285,9 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to the
-	 * atomic PWM API.
-	 */
-	pwm_apply_args(drvdata->pwm);
+	ret = pwm_adjust_config(drvdata->pwm);
+	if (ret)
+		return ret;
 
 	regulator = devm_regulator_register(&pdev->dev,
 					    &drvdata->desc, &config);
-- 
2.7.4




More information about the linux-arm-kernel mailing list