[PATCH V8 7/9] acpi: Add generic MCFG table handling
Bjorn Helgaas
helgaas at kernel.org
Tue Jun 7 18:56:31 PDT 2016
On Mon, May 30, 2016 at 05:14:20PM +0200, Tomasz Nowicki wrote:
> In order to handle PCI config space regions properly in ACPI, new MCFG
> interface is defined which does sanity checks on MCFG table and keeps its
> root pointer. The user is able to lookup MCFG regions based on
> host bridge root structure and domain:bus_start:bus_end touple.
> Use pci_mmcfg_late_init old prototype to avoid another function name.
>
> Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
> Signed-off-by: Jayachandran C <jchandra at broadcom.com>
> ---
> drivers/acpi/Kconfig | 3 ++
> drivers/acpi/Makefile | 1 +
> drivers/acpi/pci_mcfg.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/pci-acpi.h | 2 ++
> include/linux/pci.h | 2 +-
> 5 files changed, 101 insertions(+), 1 deletion(-)
> create mode 100644 drivers/acpi/pci_mcfg.c
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index b7e2e77..f98c328 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -217,6 +217,9 @@ config ACPI_PROCESSOR_IDLE
> bool
> select CPU_IDLE
>
> +config ACPI_MCFG
> + bool
> +
> config ACPI_CPPC_LIB
> bool
> depends on ACPI_PROCESSOR
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 251ce85..632e81f 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
> acpi-y += ec.o
> acpi-$(CONFIG_ACPI_DOCK) += dock.o
> acpi-y += pci_root.o pci_link.o pci_irq.o
> +obj-$(CONFIG_ACPI_MCFG) += pci_mcfg.o
> acpi-y += acpi_lpss.o acpi_apd.o
> acpi-y += acpi_platform.o
> acpi-y += acpi_pnp.o
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> new file mode 100644
> index 0000000..1847f74
> --- /dev/null
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (C) 2016 Broadcom
> + * Author: Jayachandran C <jchandra at broadcom.com>
> + * Copyright (C) 2016 Semihalf
> + * Author: Tomasz Nowicki <tn at semihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2, as
> + * published by the Free Software Foundation (the "GPL").
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License version 2 (GPLv2) for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * version 2 (GPLv2) along with this source code.
> + */
> +
> +#define pr_fmt(fmt) "ACPI: " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/pci-acpi.h>
> +
> +/* Root pointer to the mapped MCFG table */
> +static struct acpi_table_mcfg *mcfg_table;
> +static int mcfg_entries;
> +
> +int pci_mcfg_lookup(struct acpi_pci_root *root)
I think this would be better if we passed in the domain and a pointer
to the bus range resource and returned the ECAM base address. I don't
think we need to be connected to struct acpi_pci_root.
> +{
> + struct acpi_mcfg_allocation *mptr, *entry = NULL;
> + struct resource *bus_res = &root->secondary;
> + int i;
> +
> + if (mcfg_table) {
> + mptr = (struct acpi_mcfg_allocation *) &mcfg_table[1];
> + for (i = 0; i < mcfg_entries && !entry; i++, mptr++)
> + if (mptr->pci_segment == root->segment &&
> + mptr->start_bus_number == bus_res->start)
> + entry = mptr;
> + }
> +
> + /* not found, use _CBA if available, else error */
> + if (!entry) {
> + if (root->mcfg_addr)
> + return root->mcfg_addr;
> + pr_err("%04x:%pR MCFG lookup failed\n", root->segment, bus_res);
> + return -ENOENT;
> + } else if (root->mcfg_addr && entry->address != root->mcfg_addr) {
> + pr_warn("%04x:%pR CBA %pa != MCFG %lx, using CBA\n",
> + root->segment, bus_res, &root->mcfg_addr,
> + (unsigned long)entry->address);
> + return 0;
> + }
I keep looking at this code, trying to find where we "use _CBA", but I
can't find it. Oh, I see, acpi_pci_root_add() calls
acpi_pci_root_get_mcfg_addr() (which evaluates _CBA), and sets
root->mcfg_addr to the result.
"root->mcfg_addr" is sort of an unfortunate name because "MCFG" is the
ACPI table name, we've used "ECAM" for the memory-mapped config space,
and this address can come from either the MCFG table or the _CBA
method.
In the case where we have both _CBA and an MCFG entry, I think we
should prefer _CBA, and I'm not sure it's even worth warning about it.
So I think you could simplify this function if you made
pci_acpi_setup_ecam_mapping() look like this:
... pci_acpi_setup_ecam_mapping(...)
{
...
if (!root->mcfg_addr)
root->mcfg_addr = pci_mcfg_lookup(root);
if (!root->mcfg_addr) {
dev_err(..., "no ECAM region found\n");
return -EINVAL;
}
> +
> + /* found matching entry, bus range check */
> + if (entry->end_bus_number != bus_res->end) {
> + resource_size_t bus_end = min_t(resource_size_t,
> + entry->end_bus_number, bus_res->end);
> + pr_warn("%04x:%pR bus end mismatch, using %02lx\n",
> + root->segment, bus_res, (unsigned long)bus_end);
> + bus_res->end = bus_end;
> + }
> +
> + if (!root->mcfg_addr)
> + root->mcfg_addr = entry->address;
Please move the assignment to the caller (I think Lorenzo pointed this
out already).
> + return 0;
> +}
> +
> +static __init int pci_mcfg_parse(struct acpi_table_header *header)
> +{
> + if (header->length < sizeof(struct acpi_table_mcfg))
> + return -EINVAL;
> +
> + mcfg_entries = (header->length - sizeof(struct acpi_table_mcfg)) /
> + sizeof(struct acpi_mcfg_allocation);
> + if (mcfg_entries == 0) {
> + pr_err("MCFG has no entries\n");
Include an address here? I'm not really sure either of the messages
here is necessary. Users (callers of pci_mcfg_lookup()) will notice
if we can't find any ECAM space and will probably complain there,
where the message can include more information, e.g., the affected
device.
> + return -EINVAL;
> + }
> +
> + mcfg_table = (struct acpi_table_mcfg *)header;
> + pr_info("MCFG table detected, %d entries\n", mcfg_entries);
> + return 0;
> +}
> +
> +/* Interface called by ACPI - parse and save MCFG table */
I think we save a *pointer* to the MCFG table, not the table itself.
And acpi_table_parse() calls early_acpi_os_unmap_memory() immediately
after it calls pci_mcfg_parse(), so I'm doubtful that the pointer
remains valid.
> +void __init pci_mmcfg_late_init(void)
> +{
> + int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
> + if (err)
> + pr_err("Failed to parse MCFG (%d)\n", err);
> +}
> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 89ab057..e0e6dfc 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -24,6 +24,8 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
> }
> extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>
> +extern int pci_mcfg_lookup(struct acpi_pci_root *root);
> +
> static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
> {
> struct pci_bus *pbus = pdev->bus;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index bba4053..9661c85 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1724,7 +1724,7 @@ void pcibios_free_irq(struct pci_dev *dev);
> extern struct dev_pm_ops pcibios_pm_ops;
> #endif
>
> -#ifdef CONFIG_PCI_MMCONFIG
> +#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
> void __init pci_mmcfg_early_init(void);
> void __init pci_mmcfg_late_init(void);
> #else
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list