[PATCH 8/9] arm64: dts: salvator-x: Fix W=1 dtc warnings
Simon Horman
horms+renesas at verge.net.au
Tue Jun 7 17:59:45 PDT 2016
From: Geert Uytterhoeven <geert+renesas at glider.be>
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 4 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 84082922edb2..98f02631a0f0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -62,7 +62,7 @@
clock-frequency = <24576000>;
};
- vcc_sdhi0: regulator at 1 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -73,7 +73,7 @@
enable-active-high;
};
- vccq_sdhi0: regulator at 2 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -86,7 +86,7 @@
1800000 0>;
};
- vcc_sdhi3: regulator at 3 {
+ vcc_sdhi3: regulator-vcc-sdhi3 {
compatible = "regulator-fixed";
regulator-name = "SDHI3 Vcc";
@@ -97,7 +97,7 @@
enable-active-high;
};
- vccq_sdhi3: regulator at 4 {
+ vccq_sdhi3: regulator-vccq-sdhi3 {
compatible = "regulator-gpio";
regulator-name = "SDHI3 VccQ";
--
2.1.4
More information about the linux-arm-kernel
mailing list