[PATCH v5 01/18] remoteproc: make rsc table support optional
Peter Griffin
peter.griffin at linaro.org
Tue Jun 7 09:18:55 PDT 2016
Some firmware and rproc drivers such as slim core don't have a
resource table. To avoid having to fudge an empty table
in the rproc driver this patch introduces a new has_rsctable
flag. rproc drivers which don't require a rsc table can set
this flag to false, and it avoids doing the initial async
firmware load in rproc_add_virtio_devices() to parse the
rsc table during rproc_add(), and also optimises rproc_fw_boot()
code path to avoid unnecessary rsc table processing of an
empty table.
Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
---
drivers/remoteproc/da8xx_remoteproc.c | 1 +
drivers/remoteproc/remoteproc_core.c | 87 ++++++++++++++++++++++-------------
drivers/remoteproc/st_remoteproc.c | 2 +
drivers/remoteproc/ste_modem_rproc.c | 2 +
drivers/remoteproc/wkup_m3_rproc.c | 1 +
include/linux/remoteproc.h | 1 +
6 files changed, 61 insertions(+), 33 deletions(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index 009e56f..6e1d9be 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -224,6 +224,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
drproc = rproc->priv;
drproc->rproc = rproc;
rproc->has_iommu = false;
+ rproc->has_rsctable = true;
platform_set_drvdata(pdev, rproc);
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index db3958b..bef85fb 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -716,6 +716,8 @@ static int rproc_handle_resources(struct rproc *rproc, int len,
rproc_handle_resource_t handler;
int ret = 0, i;
+ WARN_ON(!rproc->has_rsctable);
+
for (i = 0; i < rproc->table_ptr->num; i++) {
int offset = rproc->table_ptr->offset[i];
struct fw_rsc_hdr *hdr = (void *)rproc->table_ptr + offset;
@@ -801,7 +803,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
struct resource_table *table, *loaded_table;
int ret, tablesz;
- if (!rproc->table_ptr)
+ if (!rproc->table_ptr && rproc->has_rsctable)
return -ENOMEM;
ret = rproc_fw_sanity_check(rproc, fw);
@@ -823,24 +825,27 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
ret = -EINVAL;
- /* look for the resource table */
- table = rproc_find_rsc_table(rproc, fw, &tablesz);
- if (!table) {
- dev_err(dev, "Failed to find resource table\n");
- goto clean_up;
- }
+ if (rproc->has_rsctable) {
+ /* look for the resource table */
+ table = rproc_find_rsc_table(rproc, fw, &tablesz);
+ if (!table) {
+ dev_err(dev, "Failed to find resource table\n");
+ goto clean_up;
+ }
- /* Verify that resource table in loaded fw is unchanged */
- if (rproc->table_csum != crc32(0, table, tablesz)) {
- dev_err(dev, "resource checksum failed, fw changed?\n");
- goto clean_up;
- }
+ /* Verify that resource table in loaded fw is unchanged */
+ if (rproc->table_csum != crc32(0, table, tablesz)) {
+ dev_err(dev, "resource checksum failed, fw changed?\n");
+ goto clean_up;
+ }
- /* handle fw resources which are required to boot rproc */
- ret = rproc_handle_resources(rproc, tablesz, rproc_loading_handlers);
- if (ret) {
- dev_err(dev, "Failed to process resources: %d\n", ret);
- goto clean_up;
+ /* handle fw resources which are required to boot rproc */
+ ret = rproc_handle_resources(rproc, tablesz,
+ rproc_loading_handlers);
+ if (ret) {
+ dev_err(dev, "Failed to process resources: %d\n", ret);
+ goto clean_up;
+ }
}
/* load the ELF segments to memory */
@@ -850,16 +855,20 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
goto clean_up;
}
- /*
- * The starting device has been given the rproc->cached_table as the
- * resource table. The address of the vring along with the other
- * allocated resources (carveouts etc) is stored in cached_table.
- * In order to pass this information to the remote device we must
- * copy this information to device memory.
- */
- loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
- if (loaded_table)
- memcpy(loaded_table, rproc->cached_table, tablesz);
+ if (rproc->has_rsctable) {
+ /*
+ * The starting device has been given the rproc->cached_table as
+ * the resource table. The address of the vring along with the
+ * other allocated resources (carveouts etc) is stored in
+ * cached_table. In order to pass this information to the remote
+ * device we must copy this information to device memory.
+ */
+
+ loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
+ if (loaded_table)
+ memcpy(loaded_table, rproc->cached_table, tablesz);
+
+ }
/* power up the remote processor */
ret = rproc->ops->start(rproc);
@@ -868,12 +877,14 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
goto clean_up;
}
+
/*
* Update table_ptr so that all subsequent vring allocations and
* virtio fields manipulation update the actual loaded resource table
* in device memory.
*/
- rproc->table_ptr = loaded_table;
+ if (rproc->has_rsctable)
+ rproc->table_ptr = loaded_table;
rproc->state = RPROC_RUNNING;
@@ -978,6 +989,7 @@ static int rproc_add_virtio_devices(struct rproc *rproc)
int rproc_trigger_recovery(struct rproc *rproc)
{
struct rproc_vdev *rvdev, *rvtmp;
+ int ret;
dev_err(&rproc->dev, "recovering %s\n", rproc->name);
@@ -992,8 +1004,12 @@ int rproc_trigger_recovery(struct rproc *rproc)
/* Free the copy of the resource table */
kfree(rproc->cached_table);
+ rproc->cached_table = NULL;
- return rproc_add_virtio_devices(rproc);
+ if (rproc->has_rsctable)
+ ret = rproc_add_virtio_devices(rproc);
+
+ return ret;
}
/**
@@ -1088,7 +1104,7 @@ static int __rproc_boot(struct rproc *rproc, bool wait)
}
/* if rproc virtio is not yet configured, wait */
- if (wait)
+ if (wait && rproc->has_rsctable)
wait_for_completion(&rproc->firmware_loading_complete);
ret = rproc_fw_boot(rproc, firmware_p);
@@ -1169,12 +1185,14 @@ void rproc_shutdown(struct rproc *rproc)
}
/* clean up all acquired resources */
- rproc_resource_cleanup(rproc);
+ if (rproc->has_rsctable)
+ rproc_resource_cleanup(rproc);
rproc_disable_iommu(rproc);
/* Give the next start a clean resource table */
- rproc->table_ptr = rproc->cached_table;
+ if (rproc->has_rsctable)
+ rproc->table_ptr = rproc->cached_table;
/* if in crash state, unlock crash handler */
if (rproc->state == RPROC_CRASHED)
@@ -1277,7 +1295,10 @@ int rproc_add(struct rproc *rproc)
/* create debugfs entries */
rproc_create_debug_dir(rproc);
- return rproc_add_virtio_devices(rproc);
+ if (rproc->has_rsctable)
+ ret = rproc_add_virtio_devices(rproc);
+
+ return ret;
}
EXPORT_SYMBOL(rproc_add);
diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
index 6f056ca..2aaf0f8 100644
--- a/drivers/remoteproc/st_remoteproc.c
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -235,6 +235,8 @@ static int st_rproc_probe(struct platform_device *pdev)
return -ENOMEM;
rproc->has_iommu = false;
+ rproc->has_rsctable = true;
+
ddata = rproc->priv;
ddata->config = (struct st_rproc_config *)match->data;
diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c
index 53dc17b..0256dff 100644
--- a/drivers/remoteproc/ste_modem_rproc.c
+++ b/drivers/remoteproc/ste_modem_rproc.c
@@ -290,6 +290,8 @@ static int sproc_probe(struct platform_device *pdev)
sproc->mdev = mdev;
sproc->rproc = rproc;
rproc->has_iommu = false;
+ rproc->has_rsctable = true;
+
mdev->drv_data = sproc;
/* Provide callback functions to modem device */
diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 02d271d..27e808a 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -170,6 +170,7 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
wkupm3 = rproc->priv;
wkupm3->rproc = rproc;
wkupm3->pdev = pdev;
+ rproc->has_rsctable = true;
for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 1c457a8..cfa180d 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -443,6 +443,7 @@ struct rproc {
struct resource_table *cached_table;
u32 table_csum;
bool has_iommu;
+ bool has_rsctable;
};
/* we currently support only two vrings per rvdev */
--
1.9.1
More information about the linux-arm-kernel
mailing list