[PATCH v2 2/2] dt-bindings: clocksource: Add Add Oxford Semiconductor RPS Timer bindings

[Neil Armstrong]

Add DT bindings for the Oxford Semiconductor RPS dual Timer.

Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 .../devicetree/bindings/timer/oxsemi,rps-timer.txt      | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt

diff --git a/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
new file mode 100644
index 0000000..3ca89cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
@@ -0,0 +1,17 @@
+Oxford Semiconductor OXNAS SoCs Family RPS Timer
+================================================
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-rps-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupts of the two timers
+- clocks : The phandle of the timer clock source
+
+example:
+
+timer0: timer at 200 {
+	compatible = "oxsemi,ox810se-rps-timer";
+	reg = <0x200 0x40>;
+	clocks = <&rpsclk>;
+	interrupts = <4 5>;
+};
-- 
1.9.1