[PATCH V2 1/2] ARM64: config: Enable PMIC MAX77620 for Tegra 2180 platform

Laxman Dewangan ldewangan at nvidia.com
Tue Jun 7 04:44:56 PDT 2016


NVIDIA's Tegra210 Jetson platform (P2180) uses the following
components:
	MAX77620 as system PMIC.
	PCA9539 as I2C GPIO bus expander

Enable the configs for PCA9539 GPIOs and Interrupt support and
MAX77620 MFD/GPIO/Pincontrol/Regulators.

Signed-off-by: Laxman Dewangan <ldewangan at nvidia.com>
---
Changes from V1:
- Rebase change and added PCA also in the enable list.

 arch/arm64/configs/defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 0bd559a..f634ccb 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -185,6 +185,7 @@ CONFIG_SPI_QUP=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
@@ -192,6 +193,9 @@ CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
@@ -202,12 +206,14 @@ CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
+CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_S2MPS11=y
@@ -262,6 +268,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_EFI=y
-- 
2.1.4




More information about the linux-arm-kernel mailing list