[GIT PULL 7/8] ARM: dts: exynos: Topic branch with Odroid XU for v4.8
Krzysztof Kozlowski
k.kozlowski at samsung.com
Mon Jun 6 05:25:32 PDT 2016
Hi,
This topic branch pulls external clk dependency (provided by Sylwester
Nawrocki).
Expected annoying conflict with DT changes here (please see the email 0/8).
Best regards,
Krzysztof
The following changes since commit 1a695a905c18548062509178b98bc91e67510864:
Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-odroid-xu-4.8
for you to fetch changes up to b8bd7e23bb0be762c39510497c931066dc62e62f:
ARM: dts: exynos: Add watchdog and Security SubSystem to Exynos5410 (2016-06-06 13:20:57 +0200)
----------------------------------------------------------------
Topic branch for adding Exynos 5410 Odroid XU board for v4.8.
This brings support for Hardkernel's Odroid XU board. It was the first
design with big.LITTLE SoC from Samsung: Exynos5410. The board is not
very popular. Newer XU3 and XU4 got more attention.
Board details:
1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is
enabled),
2. 2 GB DDR3 RAM,
3. PowerVR SGX544MP3 GPU (not enabled in DTS),
4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4,
5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of
revisions though),
6. eMMC 4.5 and microSD slots.
----------------------------------------------------------------
Krzysztof Kozlowski (30):
dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
Merge tag 'clk-v4.8-exynos5410-dt' of git://linuxtv.org/snawrocki/samsung into for-v4.8/dts-exynos5410-odroid-xu
ARM: dts: exynos: Replace deprecated hsi2c compatible on Exynos5420
ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes
ARM: dts: exynos: Enable CLKOUT on Exynos5410
ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
ARM: dts: exynos: Move common nodes to exynos5.dtsi
ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
ARM: dts: exynos: Enable UART3 on Exynos5410
ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
ARM: dts: exynos: Add USB to Exynos5410
ARM: dts: exynos: Add initial support for Odroid XU board
ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
ARM: dts: exynos: Add RTC and I2C to Exynos5410
dt-bindings: clock: Add TMU clock ID to Exynos5410
dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410
ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410
Merge tag 'clk-v4.8-exynos5410-dt-2' of git://linuxtv.org/snawrocki/samsung into for-v4.8/dts-exynos5410-odroid-xu
ARM: dts: exynos: Add Thermal Management Unit to Exynos5410
ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board
ARM: dts: exynos: Add watchdog and Security SubSystem to Exynos5410
.../bindings/arm/samsung/samsung-boards.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5.dtsi | 215 +-
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
arch/arm/boot/dts/exynos5250.dtsi | 1701 ++++++------
arch/arm/boot/dts/exynos5410-odroidxu.dts | 580 ++++
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 210 ++
arch/arm/boot/dts/exynos5410-smdk5410.dts | 6 +-
arch/arm/boot/dts/exynos5410.dtsi | 333 ++-
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 12 +-
arch/arm/boot/dts/exynos5420.dtsi | 2768 +++++++++-----------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +-
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 35 +-
arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +
arch/arm/boot/dts/exynos54xx.dtsi | 199 ++
include/dt-bindings/clock/exynos5410.h | 76 +-
16 files changed, 3593 insertions(+), 2631 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts
create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
create mode 100644 arch/arm/boot/dts/exynos54xx.dtsi
More information about the linux-arm-kernel
mailing list