[PATCH v2 1/2] ARM: imx6: disable deeper idle states when FEC is active w/o HW workaround

[Holger Schurig]

> You just config the gpio irq like below patches:
> bc20a5d6da71 (ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.)
> 6261c4c8f13e (ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.)

But this is per-board, e.g. not board-agnostic??!?!   Some board might
have uses GPIO6 for other things and rendered it unusable for this ...