[PATCH v2 9/9] coresight: Add better messages for coresight_timeout

[Suzuki K Poulose]

When we encounter a timeout waiting for a status change via
coresight_timeout, the caller always print the offset which
was tried. This is pretty much useless as it doesn't specify
the bit position we wait for. Also, one needs to lookup the
TRM to figure out, what was wrong. This patch changes all
such error messages to print something more meaningful.

Cc: joe at perches.com
Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose at arm.com>
---
 drivers/hwtracing/coresight/coresight-etb10.c | 7 +++----
 drivers/hwtracing/coresight/coresight-etm4x.c | 6 ++----
 drivers/hwtracing/coresight/coresight-tmc.c   | 7 +++----
 3 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index 4d20b0b..839c2ab 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -184,8 +184,8 @@ static void etb_disable_hw(struct etb_drvdata *drvdata)
 
 	if (coresight_timeout(drvdata->base, ETB_FFCR, ETB_FFCR_BIT, 0)) {
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n",
-			ETB_FFCR);
+			"timeout while waiting for %s\n",
+			"completion of Manual Flush");
 	}
 
 	/* disable trace capture */
@@ -193,8 +193,7 @@ static void etb_disable_hw(struct etb_drvdata *drvdata)
 
 	if (coresight_timeout(drvdata->base, ETB_FFSR, ETB_FFSR_BIT, 1)) {
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n",
-			ETB_FFCR);
+			"timeout while waiting for %s\n", "Formatter to Stop");
 	}
 
 	CS_LOCK(drvdata->base);
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 88947f3..43fa3be 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -111,8 +111,7 @@ static void etm4_enable_hw(void *info)
 	/* wait for TRCSTATR.IDLE to go up */
 	if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1))
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n",
-			TRCSTATR);
+			"timeout while waiting for %s\n", "Idle Trace Status");
 
 	writel_relaxed(config->pe_sel, drvdata->base + TRCPROCSELR);
 	writel_relaxed(config->cfg, drvdata->base + TRCCONFIGR);
@@ -184,8 +183,7 @@ static void etm4_enable_hw(void *info)
 	/* wait for TRCSTATR.IDLE to go back down to '0' */
 	if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0))
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n",
-			TRCSTATR);
+			"timeout while waiting for %s\n", "Idle Trace Status");
 
 	CS_LOCK(drvdata->base);
 
diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c
index b3275bb..c2f64f3 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@@ -38,8 +38,7 @@ void tmc_wait_for_tmcready(struct tmc_drvdata *drvdata)
 	if (coresight_timeout(drvdata->base,
 			      TMC_STS, TMC_STS_TMCREADY_BIT, 1)) {
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n",
-			TMC_STS);
+			"timeout while waiting for %s\n", "TMC to be Ready");
 	}
 }
 
@@ -56,8 +55,8 @@ void tmc_flush_and_stop(struct tmc_drvdata *drvdata)
 	if (coresight_timeout(drvdata->base,
 			      TMC_FFCR, TMC_FFCR_FLUSHMAN_BIT, 0)) {
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n",
-			TMC_FFCR);
+			"timeout while waiting for %s\n",
+			"completion of Manual Flush");
 	}
 
 	tmc_wait_for_tmcready(drvdata);
-- 
1.9.1