[PATCH v3 4/7] dt:mdio-mux: Add mdio multiplexer driver node

[Pramod Kumar]

Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.

Signed-off-by: Pramod Kumar <pramod.kumar at broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12 ++++++++++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi    | 31 +++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index ce0ab84..8f6a6cc 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -87,3 +87,15 @@
 		#size-cells = <1>;
 	};
 };
+
+&mdio_mux_iproc {
+	mdio at 10 {
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gphy0: eth-phy at 10 {
+			reg = <0x10>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 6f81c9d..1bf4bb6 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -330,6 +330,37 @@
 			      <0x65260000 0x1000>;
 		};
 
+		mdio_mux_iproc: mdio-mux at 6602023c {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x6602023c 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio at 0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy0: pci-phy at 0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+				};
+			};
+
+			mdio at 7 {
+				reg = <0x7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy1: pci-phy at 0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
 		timer0: timer at 66030000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x66030000 0x1000>;
-- 
1.9.1