[PATCH 05/14] pwm: rockchip: Avoid glitches on already running PWMs

Boris Brezillon boris.brezillon at free-electrons.com
Fri Jun 3 01:23:03 PDT 2016


The current logic will disable the PWM clk even if the PWM was left
enabled by the bootloader (because it's controlling a critical device
like a regulator for example).
Keep the PWM clk enabled if the PWM is enabled to avoid any glitches.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 drivers/pwm/pwm-rockchip.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index dfacf7d..798a787 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -299,6 +299,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *id;
 	struct rockchip_pwm_chip *pc;
+	struct pwm_state state;
 	struct resource *r;
 	int ret;
 
@@ -319,7 +320,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->clk))
 		return PTR_ERR(pc->clk);
 
-	ret = clk_prepare(pc->clk);
+	ret = clk_prepare_enable(pc->clk);
 	if (ret)
 		return ret;
 
@@ -342,12 +343,33 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 	}
 
+	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
+	pwm_get_state(pc->chip.pwms, &state);
+	if (!state.enabled)
+		clk_disable(pc->clk);
+
 	return ret;
 }
 
 static int rockchip_pwm_remove(struct platform_device *pdev)
 {
 	struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev);
+	struct pwm_state state;
+
+	/*
+	 * Disable the PWM clk before unpreparing it if the PWM device is still
+	 * running. This should only happen when the last PWM user left it
+	 * enabled, or when nobody requested a PWM that was previously enabled
+	 * by the bootloader.
+	 *
+	 * FIXME: Maybe the core should disable all PWM devices in
+	 * pwmchip_remove(). In this case we'd only have to call
+	 * clk_unprepare() after pwmchip_remove().
+	 *
+	 */
+	pwm_get_state(pc->chip.pwms, &state);
+	if (state.enabled)
+		clk_disable(pc->clk);
 
 	clk_unprepare(pc->clk);
 
-- 
2.7.4




More information about the linux-arm-kernel mailing list