[PATCH v2 0/9] raspberry pi 3 patch series, part 1: essentials
Gerd Hoffmann
kraxel at redhat.com
Thu Jun 2 23:18:19 PDT 2016
Hi,
Raspberry pi 3 patches, next round. I'll go split the longish patch
series into smaller ones. I'll also go include the linux-arm-kernel
list this time (note I'm subscribed to linux-rpi-kernel only so please
take care to keep me in Cc). This is part one with just the essential
stuff needed to get the rpi3 boot, without wifi support.
Changes:
* dropped ARCH_BCM kconfig option.
* drop include hack for rpi3 device tree in arm.
* drop DMA offset patch, pick up the version from Alex instead.
Patches are also available from:
git://git.kraxel.org/linux bcm2837-47-v2
Note that the git branch has the complete set of patches (including
device tree patches and rpi3 wifi).
cheers,
Gerd
Alexander Graf (1):
arm64: Allow for different DMA and CPU bus offsets
Eric Anholt (5):
irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.
arm64: Add platform selection for BCM2835.
arm64: Add BCM2835 support to the defconfig.
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
Gerd Hoffmann (2):
pinctrl: walk into bcm subdir unconditionally
ARM: bcm2837: dt: Add the ethernet to the device trees
Lubomir Rintel (1):
ARM: bcm2835: dt: Add the ethernet to the device trees
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 +
arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 ++++++
arch/arm/boot/dts/bcm283x.dtsi | 2 +
arch/arm64/Kconfig.platforms | 13 ++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 30 +++++++++
arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 74 ++++++++++++++++++++++
arch/arm64/configs/defconfig | 23 ++++++-
arch/arm64/include/asm/dma-mapping.h | 17 ++++-
drivers/irqchip/irq-bcm2835.c | 3 +-
drivers/irqchip/irq-bcm2836.c | 2 +-
drivers/pinctrl/Makefile | 2 +-
18 files changed, 206 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837.dtsi
--
1.8.3.1
More information about the linux-arm-kernel
mailing list