[PATCH v2 2/2] ARM: at91: Add DT support for Olimex SAM9-L9260 board.

[Rob Herring]

On Tue, May 31, 2016 at 12:47:31PM +0530, Raashid Muhammed wrote:
> From: Raashid Muhammed <raashidmuhammed at zilogic.com>
> 
> sam9-l9260 is a low cost board designed by Olimex.
> 
> More information is available at:
> https://www.olimex.com/Products/ARM/Atmel/SAM9-L9260/
> 
> Signed-off-by: Raashid Muhammed <raashidmuhammed at zilogic.com>
> Reviewed-by: Vijay Kumar B. <vijaykumar at bravegnu.org>
> ---
>  Documentation/devicetree/bindings/arm/olimex.txt |   8 +-
>  arch/arm/boot/dts/Makefile                       |   1 +
>  arch/arm/boot/dts/at91-sam9_l9260.dts            | 115 +++++++++++++++++++++++
>  3 files changed, 122 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/boot/dts/at91-sam9_l9260.dts

One nit, otherwise:

Acked-by: Rob Herring <robh at kernel.org>

> +			spi0: spi at fffc8000 {
> +				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
> +				status = "okay";
> +
> +				mtd_dataflash at 0 {

flash at 0

> +					compatible = "atmel,at45", "atmel,dataflash";
> +					spi-max-frequency = <15000000>;
> +					reg = <0>;
> +				};
> +			};