[PATCH] ARM: dts: am335x-boneblack: add i2c1 DT entry

[Robert Nelson]

On Thu, Jun 2, 2016 at 12:39 PM, Tony Lindgren <tony at atomide.com> wrote:
>
> * Robert Nelson <robertcnelson at gmail.com> [160602 10:39]:
> > On Thu, Jun 2, 2016 at 2:41 AM, Yong Li <yong.b.li at intel.com> wrote:
> >
> > > From: Yong Li <sdliyong at gmail.com>
> > >
> > > Without this patch, I2C-1 is missing on beaglebone black boards
> > >
> > > Signed-off-by: Yong Li <sdliyong at gmail.com>
> > > ---
> > >  arch/arm/boot/dts/am335x-boneblack.dts | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > >
> >
> >
> > This is also 'common' for the white/green, if your really going to push
> > this, please add it to:
> >
> > am335x-bone-common.dtsi
>
> But isn't this exposed on the cape pins? So the use can be
> whatever for these pins?

That is correct, "i2c1" is on the cape connector, with no primary
function defined.

Currently on mainline, the board and cape eeprom i2c bus's are enabled.

i2c0 = board eeprom
i2c2 = 'cape' eeprom

personally, nak by me to add i2c1 by default, should use overlay's to enable it.

Regards,

-- 
Robert Nelson
https://rcn-ee.com/