[PATCHv7 0/6] dmaengine: rcar-dmac: add iommu support for slave transfers

[Vinod Koul]

On Thu, Jun 02, 2016 at 02:58:07PM +0200, Niklas Söderlund wrote:
> Hi Vinod,
> 
> On 2016-06-01 23:36:11 +0530, Vinod Koul wrote:
> > On Wed, Jun 01, 2016 at 05:22:23PM +0200, Niklas Söderlund wrote:
> > > Hi,
> > > 
> > > [In this v7 series I have tried to address the questions raised by Christoph 
> > > Hellwig and I hope it can awnser your concernes regarding dma-debug.]
> > > 
> > > This series tries to solve the problem with DMA with device registers
> > > (MMIO registers) that are behind an IOMMU for the rcar-dmac driver. A
> > > recent patch '9575632 (dmaengine: make slave address physical)'
> > > clarifies that DMA slave address provided by clients is the physical
> > > address. This puts the task of mapping the DMA slave address from a
> > > phys_addr_t to a dma_addr_t on the DMA engine.
> > > 
> > > Without an IOMMU this is easy since the phys_addr_t and dma_addr_t are
> > > the same and no special care is needed. However if you have a IOMMU you
> > > need to map the DMA slave phys_addr_t to a dma_addr_t using something
> > > like this.
> > > 
> > > This series is based on top of v4.7-rc1.
> > 
> > The dmanegine bits looks okay to me. Btw how is the merge planned for this?
> > Do you wnat this to be merged thru dmaengine tree or something else?
> 
> Yes, since the arm specific patch are depending on other parts of the 
> series I was hoping to be able to get Russells Ack on it and then try to 
> get it all in through the dmaengine tree.

Sounds good to me..

> If you see a better way I'm happy to do it that way, let me know what 
> you think. I hold off v8 that adresses the issues Russell brought up a 
> few days untill I know what you think is best.

-- 
~Vinod