[PATCH 2/4] ARM: multi_v7_defconfig: Enable drivers for Exynos4210 Universal C210 board

Krzysztof Kozlowski k.kozlowski at samsung.com
Wed Jun 1 22:55:14 PDT 2016


Enable drivers needed to get Exynos 4210 Universal C210 board working:
MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD
parallel output and Samsung LD9040 RGB panel.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
---
 arch/arm/configs/multi_v7_defconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c5db9cf02e31..68cb3c766c39 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -359,6 +359,7 @@ CONFIG_SPI_BCM2835=y
 CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
 CONFIG_SPI_DAVINCI=y
+CONFIG_SPI_GPIO=m
 CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
@@ -411,6 +412,7 @@ CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_MAX8997=m
+CONFIG_CHARGER_MAX8998=m
 CONFIG_CHARGER_TPS65090=y
 CONFIG_AXP20X_POWER=m
 CONFIG_POWER_RESET_AS3722=y
@@ -467,6 +469,7 @@ CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=m
 CONFIG_MFD_MAX8907=y
 CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX8998=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_PM8921_CORE=y
 CONFIG_MFD_QCOM_RPM=y
@@ -496,6 +499,7 @@ CONFIG_REGULATOR_MAX14577=m
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_MAX8973=y
 CONFIG_REGULATOR_MAX8997=m
+CONFIG_REGULATOR_MAX8998=m
 CONFIG_REGULATOR_MAX77686=y
 CONFIG_REGULATOR_MAX77693=m
 CONFIG_REGULATOR_MAX77802=m
@@ -550,9 +554,10 @@ CONFIG_DRM_NXP_PTN3460=m
 CONFIG_DRM_PARADE_PS8622=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_FIMD=y
 CONFIG_DRM_EXYNOS_MIXER=y
+CONFIG_DRM_EXYNOS_DPI=y
+CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_ROCKCHIP=m
 CONFIG_ROCKCHIP_ANALOGIX_DP=m
@@ -565,6 +570,7 @@ CONFIG_DRM_RCAR_HDMI=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_TEGRA=y
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_VC4=y
@@ -712,6 +718,7 @@ CONFIG_RTC_DRV_AS3722=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_HYM8563=m
 CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_MAX8998=m
 CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
-- 
1.9.1




More information about the linux-arm-kernel mailing list