[PATCH 26/32] enable uart1 on the BT pins

[Gerd Hoffmann]

From: Eric Anholt <eric at anholt.net>

---
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 4636c16..099dd48d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -31,6 +31,8 @@
 };
 
 &uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio32>;
 	status = "okay";
 };
 
-- 
1.8.3.1