[RESEND PATCH 2/6] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY

[Chris Zhong]

Hi Rob


On 06/01/2016 10:54 PM, Rob Herring wrote:
> On Fri, May 27, 2016 at 06:45:38PM +0800, Chris Zhong wrote:
>> This patch adds a binding that describes the Rockchip USB Type-C PHY
>> for rk3399.
>>
>> Signed-off-by: Chris Zhong <zyw at rock-chips.com>
>> ---
>>
>>   .../devicetree/bindings/phy/phy-rockchip-typec.txt | 55 ++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> new file mode 100644
>> index 0000000..402f667
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> @@ -0,0 +1,55 @@
>> +ROCKCHIP type-c PHY
>> +
>> +Required properties:
>> + - compatible: should be "rockchip,rk3399-typec-phy"
>> + - reg : Address and length of the usb phy control register set
>> + - rockchip,grf : phandle to the syscon managing the "general
>> +   register files"
>> + - clocks : phandle + clock specifier for the phy clocks
>> + - clock-names: string, clock name, must be "tcpdcore", "tcpdphy_ref";
>> + - resets : a list of phandle + reset specifier pairs
>> + - reset-names : string reset name, must be:
>> +		 "tcphy_rst", "tcphy_pipe_rst", "uphy_tcphy_rst"
>> + - #phy-cells: Must be 0.  See ./phy-bindings.txt for details.
>> + - rockchip,usb3phy*: phy registers embed in grf
> You need to document each one and state the number of cells and what the
> contain. Also, don't use '_' in the names.
I am going to move these registers to phy driver, Thanks for your comment.


>
>> +
>> +Example:
>> +	tcphy0: phy at ff7c0000 {
>> +		compatible = "rockchip,rk3399-typec-phy";
>> +		reg = <0x0 0xff7c0000 0x0 0x40000>;
>> +		#phy-cells = <0>;
>> +		rockchip,grf = <&grf>;
>> +		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
>> +			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
>> +		clock-names = "tcpdcore", "tcpdphy_ref";
>> +		resets = <&cru SRST_UPHY0>,
>> +			 <&cru SRST_UPHY0_PIPE_L00>,
>> +			 <&cru SRST_P_UPHY0_TCPHY>;
>> +		reset-names = "tcphy_rst", "tcphy_pipe_rst", "uphy_tcphy_rst";
>> +		rockchip,usb3phy_con0 = <0x0e580 0 16>;
>> +		rockchip,usb3phy_con1 = <0x0e584 0 16>;
>> +		rockchip,usb3phy_con2 = <0x0e588 0 16>;
>> +		rockchip,usb3phy_status0 = <0x0e5c0 0 13>;
>> +		rockchip,usb3phy_status1 = <0x0e5c4 0 12>;
>> +		status = "disabled";
>> +	};
>> +
>> +	tcphy1: phy at ff800000 {
>> +		compatible = "rockchip,rk3399-typec-phy";
>> +		reg = <0x0 0xff800000 0x0 0x40000>;
>> +		#phy-cells = <0>;
>> +		rockchip,grf = <&grf>;
>> +		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
>> +			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
>> +		clock-names = "tcpdcore", "tcpdphy_ref";
>> +		resets = <&cru SRST_UPHY1>,
>> +		         <&cru SRST_UPHY1_PIPE_L00>,
>> +			 <&cru SRST_P_UPHY1_TCPHY>;
>> +		reset-names = "tcphy_rst", "tcphy_pipe_rst", "uphy_tcphy_rst";
>> +		rockchip,usb3phy_con0 = <0x0e58c 0 16>;
>> +		rockchip,usb3phy_con1 = <0x0e590 0 16>;
>> +		rockchip,usb3phy_con2 = <0x0e594 0 16>;
>> +		rockchip,usb3phy_status0 = <0x0e5c0 16 13>;
>> +		rockchip,usb3phy_status1 = <0x0e5c4 16 12>;
>> +		status = "disabled";
>> +	};
>> -- 
>> 2.6.3
>>
>
>