[PATCH v2 14/14] ARM64: dts: Define CPU power domain for MSM8916

[Lina Iyer]

Define power domain and the power states for the domain as defined by
the PSCI firmware. The 8916 firmware supports OS initiated method of
powering off the CPU clusters.

Cc: <devicetree at vger.kernel.org>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 3029773..d122fa1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -64,6 +64,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		CPU1: cpu at 1 {
@@ -73,6 +74,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		CPU2: cpu at 2 {
@@ -82,6 +84,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		CPU3: cpu at 3 {
@@ -91,6 +94,7 @@
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD>;
 		};
 
 		L2_0: l2-cache {
@@ -110,6 +114,29 @@
 		};
 	};
 
+	CPU_PD: cpu-pd at 0 {
+		#power-domain-cells = <0>;
+		domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWR_DWN>;
+	};
+
+	cpu-domain-states {
+		CLUSTER_RET: domain_ret {
+			compatible = "arm,idle-state";
+			arm,psci-suspend-param = <0x1000010>;
+			entry-latency-us = <500>;
+			exit-latency-us = <500>;
+			residency-us = <2000>;
+		 };
+
+		CLUSTER_PWR_DWN: domain_gdhs {
+			compatible = "arm,idle-state";
+			arm,psci-suspend-param = <0x1000030>;
+			entry-latency-us = <2000>;
+			exit-latency-us = <2000>;
+			residency-us = <6000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
-- 
2.7.4