[PATCH v2] reset: uniphier: add reset controller drivers for UniPhier SoCs

[Rob Herring]

On Wed, Jul 27, 2016 at 03:20:08AM +0900, Masahiro Yamada wrote:
> This is the initial commit for UniPhier reset controller drivers.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---
> 
> Changes in v2 (mostly suggested by Philipp Zabel):
>   - Unify multiple module_platform_driver() boilerplates into one
>   - Unify tiny driver code and decrease the number of files
>   - Invert the logic of .deassert_val, changing it into .assert_val
>   - Show error code when failed to get regmap
>   - Add a binding document
>   - Support more reset signals
> 
>  .../devicetree/bindings/reset/uniphier-reset.txt   |  99 ++++++++
>  MAINTAINERS                                        |   1 +
>  drivers/reset/Kconfig                              |   1 +
>  drivers/reset/Makefile                             |   1 +
>  drivers/reset/uniphier/Kconfig                     |   9 +
>  drivers/reset/uniphier/Makefile                    |   5 +
>  drivers/reset/uniphier/reset-uniphier-core.c       | 270 +++++++++++++++++++++
>  drivers/reset/uniphier/reset-uniphier-mio.c        |  55 +++++
>  drivers/reset/uniphier/reset-uniphier-peri.c       |  55 +++++
>  drivers/reset/uniphier/reset-uniphier-sys.c        |  77 ++++++
>  drivers/reset/uniphier/reset-uniphier.h            |  57 +++++
>  11 files changed, 630 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/uniphier-reset.txt
>  create mode 100644 drivers/reset/uniphier/Kconfig
>  create mode 100644 drivers/reset/uniphier/Makefile
>  create mode 100644 drivers/reset/uniphier/reset-uniphier-core.c
>  create mode 100644 drivers/reset/uniphier/reset-uniphier-mio.c
>  create mode 100644 drivers/reset/uniphier/reset-uniphier-peri.c
>  create mode 100644 drivers/reset/uniphier/reset-uniphier-sys.c
>  create mode 100644 drivers/reset/uniphier/reset-uniphier.h
> 
> diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> new file mode 100644
> index 0000000..c2fb0d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> @@ -0,0 +1,99 @@
> +UniPhier reset controller
> +
> +
> +System reset
> +------------
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
> +    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
> +    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
> +    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
> +    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
> +    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
> +    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
> +    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
> +- #reset-cells: should be 1.
> +
> +Note:
> +The reset node should be a child of a syscon node.
> +
> +Example:
> +
> +	sysctrl at 61840000 {
> +		compatible = "simple-mfd", "syscon";

This needs a specific compatible string.

> +		reg = <0x61840000 0x4000>;
> +
> +		reset {
> +			compatible = "socionext,uniphier-ld20-reset";
> +			#reset-cells = <1>;
> +		};
> +
> +		other nodes ...
> +	};
> +
> +
> +Media I/O (MIO) reset
> +---------------------
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
> +    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
> +    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
> +    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
> +    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
> +    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
> +    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
> +    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
> +- #reset-cells: should be 1.
> +
> +Note:
> +The reset node should be a child of a syscon node.
> +
> +Example:
> +
> +	mioctrl at 59810000 {
> +		compatible = "simple-mfd", "syscon";
> +		reg = <0x59810000 0x800>;
> +
> +		reset {
> +			compatible = "socionext,uniphier-ld20-mio-reset";
> +			#reset-cells = <1>;
> +		};
> +
> +		other nodes ...
> +	};
> +
> +
> +Peripheral reset
> +----------------
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
> +    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
> +    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
> +    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
> +    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
> +    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
> +    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
> +- #reset-cells: should be 1.
> +
> +Note:
> +The reset node should be a child of a syscon node.
> +
> +Example:
> +
> +	perictrl at 59820000 {
> +		compatible = "simple-mfd", "syscon";
> +		reg = <0x59820000 0x200>;
> +
> +		reset {
> +			compatible = "socionext,uniphier-ld20-peri-reset";
> +			#reset-cells = <1>;
> +		};
> +
> +		other nodes ...
> +	};