[Patch v2 1/5] ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone

[Bjorn Andersson]

On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:

> This DTS file have support LG Nexus 5 (codenamed hammerhead).
> Initial version have support for just serial console over headphone
> jack.
> 
> Cc: Andy Gross <andy.gross at linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> Cc: David Brown <david.brown at linaro.org>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Russell King <linux at armlinux.org.uk>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-arm-msm at vger.kernel.org
> Signed-off-by: Bhushan Shah <bshah at kde.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>

Regards,
Bjorn

> ---
> Changes in v2
>     - Removed qcom,msm-id
>     - Added "lge,hammerhead" in the compatible
> 
>  arch/arm/boot/dts/Makefile                         |  1 +
>  .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     | 23 ++++++++++++++++++++++
>  2 files changed, 24 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 414b427..13947ec 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -584,6 +584,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-ipq8064-ap148.dtb \
>  	qcom-msm8660-surf.dtb \
>  	qcom-msm8960-cdp.dtb \
> +	qcom-msm8974-lge-nexus5-hammerhead.dtb \
>  	qcom-msm8974-sony-xperia-honami.dtb
>  dtb-$(CONFIG_ARCH_REALVIEW) += \
>  	arm-realview-pb1176.dtb \
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> new file mode 100644
> index 0000000..68f3a8a
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -0,0 +1,23 @@
> +#include "qcom-msm8974.dtsi"
> +#include "qcom-pm8841.dtsi"
> +#include "qcom-pm8941.dtsi"
> +
> +/ {
> +	model = "LGE MSM 8974 HAMMERHEAD";
> +	compatible = "lge,hammerhead", "qcom,msm8974";
> +
> +	aliases {
> +		serial0 = &blsp1_uart1;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&soc {
> +	serial at f991d000 {
> +		status = "ok";
> +	};
> +
> +};
> -- 
> 2.9.0
>