[PATCH 12/18] ARM: mvebu: a39x: add missing nodes describing USB2.0 and USB3.0

[Gregory CLEMENT]

Hi Grzegorz,
 
 On jeu., juil. 21 2016, Grzegorz Jaszczyk <jaz at semihalf.com> wrote:

> The whole Armada 39x SoC family of processors has one USB2.0 and one
> USB3.0 which all can be supported with existing drivers.
>
Change the prefix to "ARM: dts: mvebu: armada-39x:"

Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>

Thanks,

Gregory
> Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
> ---
>  arch/arm/boot/dts/armada-39x.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
> index 0749878..1225cd8 100644
> --- a/arch/arm/boot/dts/armada-39x.dtsi
> +++ b/arch/arm/boot/dts/armada-39x.dtsi
> @@ -381,6 +381,14 @@
>  				reg = <0x22000 0x1000>;
>  			};
>  
> +			usb at 58000 {
> +				compatible = "marvell,orion-ehci";
> +				reg = <0x58000 0x500>;
> +				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gateclk 18>;
> +				status = "disabled";
> +			};
> +
>  			xor at 60800 {
>  				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
>  				reg = <0x60800 0x100
> @@ -457,6 +465,14 @@
>  				reg = <0xe4078 0x4>, <0xe4074 0x4>;
>  				status = "okay";
>  			};
> +
> +			usb3 at f8000 {
> +				compatible = "marvell,armada-380-xhci";
> +				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
> +				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gateclk 10>;
> +				status = "disabled";
> +			};
>  		};
>  
>  		pcie-controller {
> -- 
> 1.8.3.1
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com