[PATCH] ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9
Rafał Miłecki
zajec5 at gmail.com
Wed Jul 27 14:18:01 PDT 2016
BCM53573 seems to be low priced alternative for standard Northstar
chipsets. It uses single core Cortex-A7, doesn't have SDU or local (TWD)
timer. It was also stripped out of independent SPI controller and 2
GMACs.
DTS for Tenda AC9 isn't completed yet. It misses e.g. switch entry (we
still need some bgmac/b53 fixes) and probably some clocks. It adds
support for basic features however and can be improved later.
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
MAINTAINERS | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 74 ++++++++++++++++
arch/arm/boot/dts/bcm53573.dtsi | 147 +++++++++++++++++++++++++++++++
4 files changed, 224 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47189-tenda-ac9.dts
create mode 100644 arch/arm/boot/dts/bcm53573.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index 7304d2e..eceff03 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2516,6 +2516,8 @@ S: Maintained
F: arch/arm/mach-bcm/bcm_5301x.c
F: arch/arm/boot/dts/bcm5301x.dtsi
F: arch/arm/boot/dts/bcm470*
+F: arch/arm/boot/dts/bcm53573*
+F: arch/arm/boot/dts/bcm47189*
BROADCOM BCM63XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli at gmail.com>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 973b0da..f7ce377 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47189-tenda-ac9.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
new file mode 100644
index 0000000..4403ae8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal at milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Tenda AC9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:blue:system";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
new file mode 100644
index 0000000..efa07de
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal at milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18310000 0x00008000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gic: interrupt-controller at 1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x0100>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ alp: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ };
+ };
+
+ axi at 18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* IEEE 802.11 0 */
+ <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 0 */
+ <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 2.0 Controller */
+ <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 0 */
+ <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* IEEE 802.11 1 */
+ <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon: chipcommon at 0 {
+ compatible = "simple-bus";
+ reg = <0x00000000 0x1000>;
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ uart0: serial at 0300 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&alp>;
+ status = "okay";
+ };
+ };
+
+ usb2: usb2 at 4000 {
+ reg = <0x4000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ehci: ehci at 4000 {
+ compatible = "generic-ehci";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ohci: ohci at d000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0xd000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gmac0: ethernet at 5000 {
+ reg = <0x5000 0x1000>;
+ };
+
+ gmac1: ethernet at b000 {
+ reg = <0xb000 0x1000>;
+ };
+ };
+};
--
1.8.4.5
More information about the linux-arm-kernel
mailing list