[PATCH v4 6/6] ARM: dts: silk: add sound support

Sergei Shtylyov sergei.shtylyov at cogentembedded.com
Wed Jul 27 14:05:58 PDT 2016


Define the SILK board dependent part of the R8A7794 sound  device node.
Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
sound support").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
Changes in version 3:
- new patch in this series;
- renamed the X9 clock node, getting rid of the "clock-output-names" property;
- removed the "renesas," prefix from the pin properties;
- refreshed the patch.

 arch/arm/boot/dts/r8a7794-silk.dts |   70 +++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -193,6 +227,16 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
 		function = "du1";
 	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -230,6 +274,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec at 12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -392,3 +442,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};




More information about the linux-arm-kernel mailing list