[PATCH v3 4/6] usb: core: add power sequence handling for USB devices

[Joshua Clayton]

On 07/20/2016 02:40 AM, Peter Chen wrote:
> Some hard-wired USB devices need to do power sequence to let the
> device work normally, the typical power sequence like: enable USB
> PHY clock, toggle reset pin, etc. But current Linux USB driver
> lacks of such code to do it, it may cause some hard-wired USB devices
> works abnormal or can't be recognized by controller at all.
>
> In this patch, it calls power sequence library APIs to finish
> the power sequence events. At first, it calls pwrseq_alloc_generic
> to create a generic power sequence instance, then it will do power
> on sequence at hub's probe for all devices under this hub
> (includes root hub).
>
> At hub_disconnect, it will do power off sequence which is at powered
> on list.
>
> Signed-off-by: Peter Chen <peter.chen at nxp.com>
> ---
>  drivers/usb/core/Makefile |   1 +
>  drivers/usb/core/hub.c    |  12 ++++--
>  drivers/usb/core/hub.h    |  12 ++++++
>  drivers/usb/core/pwrseq.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 122 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/usb/core/pwrseq.c
>
> diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
> index da36b78..5fd2f54 100644
> --- a/drivers/usb/core/Makefile
> +++ b/drivers/usb/core/Makefile
> @@ -10,5 +10,6 @@ usbcore-y += port.o
>  usbcore-$(CONFIG_OF)		+= of.o
>  usbcore-$(CONFIG_PCI)		+= hcd-pci.o
>  usbcore-$(CONFIG_ACPI)		+= usb-acpi.o
> +usbcore-$(CONFIG_PWRSEQ_GENERIC) += pwrseq.o
>  
>  obj-$(CONFIG_USB)		+= usbcore.o
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index bee1351..a346a8b 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1700,6 +1700,7 @@ static void hub_disconnect(struct usb_interface *intf)
>  	hub->error = 0;
>  	hub_quiesce(hub, HUB_DISCONNECT);
>  
> +	hub_pwrseq_off(hub);
>  	mutex_lock(&usb_port_peer_mutex);
>  
>  	/* Avoid races with recursively_mark_NOTATTACHED() */
> @@ -1733,6 +1734,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
>  	struct usb_endpoint_descriptor *endpoint;
>  	struct usb_device *hdev;
>  	struct usb_hub *hub;
> +	int ret = -ENODEV;
>  
>  	desc = intf->cur_altsetting;
>  	hdev = interface_to_usbdev(intf);
> @@ -1839,6 +1841,7 @@ descriptor_error:
>  	INIT_DELAYED_WORK(&hub->leds, led_work);
>  	INIT_DELAYED_WORK(&hub->init_work, NULL);
>  	INIT_WORK(&hub->events, hub_event);
> +	INIT_LIST_HEAD(&hub->pwrseq_on_list);
>  	usb_get_intf(intf);
>  	usb_get_dev(hdev);
>  
> @@ -1852,11 +1855,14 @@ descriptor_error:
>  	if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
>  		hub->quirk_check_port_auto_suspend = 1;
>  
> -	if (hub_configure(hub, endpoint) >= 0)
> -		return 0;
> +	if (hub_configure(hub, endpoint) >= 0) {
> +		ret = hub_pwrseq_on(hub);
> +		if (!ret)
> +			return 0;
> +	}
>  
>  	hub_disconnect(intf);
> -	return -ENODEV;
> +	return ret;
>  }
>  
>  static int
> diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> index 34c1a7e..9473f6f 100644
> --- a/drivers/usb/core/hub.h
> +++ b/drivers/usb/core/hub.h
> @@ -78,6 +78,7 @@ struct usb_hub {
>  	struct delayed_work	init_work;
>  	struct work_struct      events;
>  	struct usb_port		**ports;
> +	struct list_head	pwrseq_on_list; /* powered pwrseq node list */
>  };
>  
>  /**
> @@ -166,3 +167,14 @@ static inline int hub_port_debounce_be_stable(struct usb_hub *hub,
>  {
>  	return hub_port_debounce(hub, port1, false);
>  }
> +
> +#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC)
> +int hub_pwrseq_on(struct usb_hub *hub);
> +void hub_pwrseq_off(struct usb_hub *hub);
> +#else
> +static inline int hub_pwrseq_on(struct usb_hub *hub)
> +{
> +	return 0;
> +}
> +static inline void hub_pwrseq_off(struct usb_hub *hub) {}
> +#endif /* CONFIG_PWRSEQ_GENERIC */
> diff --git a/drivers/usb/core/pwrseq.c b/drivers/usb/core/pwrseq.c
> new file mode 100644
> index 0000000..837fe66
> --- /dev/null
> +++ b/drivers/usb/core/pwrseq.c
> @@ -0,0 +1,100 @@
> +/*
> + * pwrseq.c	USB device power sequence management
> + *
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Author: Peter Chen <peter.chen at nxp.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2  of
> + * the License as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/list.h>
> +#include <linux/of.h>
> +#include <linux/power/pwrseq.h>
> +#include <linux/slab.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
> +
> +#include "hub.h"
> +
> +struct usb_pwrseq_node {
> +	struct pwrseq *pwrseq;
> +	struct list_head list;
> +};
> +
> +static int hub_of_pwrseq_on(struct device_node *np, struct usb_hub *hub)
> +{
> +	struct pwrseq *pwrseq;
> +	struct usb_pwrseq_node *pwrseq_node;
> +	int ret;
> +
> +	pwrseq = pwrseq_alloc_generic();
> +	if (IS_ERR(pwrseq))
> +		return PTR_ERR(pwrseq);
> +
> +	ret = pwrseq_get(np, pwrseq);
> +	if (ret)
> +		goto pwr_free;
> +
> +	ret = pwrseq_on(np, pwrseq);
> +	if (ret)
> +		goto pwr_put;
> +
> +	pwrseq_node = kzalloc(sizeof(*pwrseq_node), GFP_KERNEL);
> +	pwrseq_node->pwrseq = pwrseq;
> +	list_add(&pwrseq_node->list, &hub->pwrseq_on_list);
> +
> +	return 0;
> +
> +pwr_put:
> +	pwrseq_put(pwrseq);
> +pwr_free:
> +	pwrseq_free(pwrseq);
> +	return ret;
> +}
> +
> +int hub_pwrseq_on(struct usb_hub *hub)
> +{
> +	struct device *parent;
> +	struct usb_device *hdev = hub->hdev;
> +	struct device_node *np;
> +	int ret;
> +
> +	if (hdev->parent)
> +		parent = &hdev->dev;
> +	else
> +		parent = bus_to_hcd(hdev->bus)->self.controller;
> +
> +	for_each_child_of_node(parent->of_node, np) {
> +		ret = hub_of_pwrseq_on(np, hub);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +void hub_pwrseq_off(struct usb_hub *hub)
> +{
> +	struct pwrseq *pwrseq;
> +	struct usb_pwrseq_node *pwrseq_node, *tmp_node;
> +
> +	list_for_each_entry_safe(pwrseq_node, tmp_node,
> +			&hub->pwrseq_on_list, list) {
> +		pwrseq = pwrseq_node->pwrseq;
> +		pwrseq_off(pwrseq);
> +		pwrseq_put(pwrseq);
> +		pwrseq_free(pwrseq);
> +		list_del(&pwrseq_node->list);
> +		kfree(pwrseq_node);
> +	}
> +}
Patch 4 does not apply for me
(The Makefile has  a "usbcore-$(CONFIG_OF) += of.o"
line which I don't see in 4.7 or linux/next master).
Is there another patch set this series depends on?