[PATCH v9 5/9] acpi/arm64: Add GTDT table parse driver
Fu Wei
fu.wei at linaro.org
Tue Jul 26 05:40:49 PDT 2016
Hi Rafael,
On 26 July 2016 at 19:50, Rafael J. Wysocki <rjw at rjwysocki.net> wrote:
> On Monday, July 25, 2016 11:27:03 PM fu.wei at linaro.org wrote:
>> From: Fu Wei <fu.wei at linaro.org>
>>
>> This patch adds support for parsing arch timer in GTDT,
>> provides some kernel APIs to parse all the PPIs and
>> always-on info in GTDT and export them.
>>
>> By this driver, we can simplify arm_arch_timer drivers, and
>> separate the ACPI GTDT knowledge from it.
>>
>> Signed-off-by: Fu Wei <fu.wei at linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
>
> From the ACPI perspective:
>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
Great thanks for your help, I just posted v10, then got your ACK :-)
But there is not change in the patch, I 'm assuming that your ACK
still works for my v10 :-)
>
> and I'm assuming that the patches will go in via some other (non-ACPI) tree.
I think so, I guess the clocksource maintainer will take care of it.
Daniel, is this patch will go into clocksource tree?
Thanks for your help! :-)
>
>> ---
>> arch/arm64/Kconfig | 1 +
>> drivers/acpi/Kconfig | 5 ++
>> drivers/acpi/Makefile | 1 +
>> drivers/acpi/arm64/Kconfig | 5 ++
>> drivers/acpi/arm64/Makefile | 1 +
>> drivers/acpi/arm64/acpi_gtdt.c | 152 +++++++++++++++++++++++++++++++++++++++++
>> drivers/clocksource/Kconfig | 1 -
>> include/linux/acpi.h | 6 ++
>> 8 files changed, 171 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 5a0a691..0b9fba7 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -2,6 +2,7 @@ config ARM64
>> def_bool y
>> select ACPI_CCA_REQUIRED if ACPI
>> select ACPI_GENERIC_GSI if ACPI
>> + select ACPI_GTDT if ACPI
>> select ACPI_REDUCED_HARDWARE_ONLY if ACPI
>> select ARCH_HAS_DEVMEM_IS_ALLOWED
>> select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index b7e2e77..1cdc7d2 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -521,4 +521,9 @@ config XPOWER_PMIC_OPREGION
>>
>> endif
>>
>> +if ARM64
>> +source "drivers/acpi/arm64/Kconfig"
>> +
>> +endif
>> +
>> endif # ACPI
>> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
>> index 251ce85..1a94ff7 100644
>> --- a/drivers/acpi/Makefile
>> +++ b/drivers/acpi/Makefile
>> @@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
>> obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
>> obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
>> obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
>> +obj-$(CONFIG_ARM64) += arm64/
>>
>> video-objs += acpi_video.o video_detect.o
>> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
>> new file mode 100644
>> index 0000000..80201be
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/Kconfig
>> @@ -0,0 +1,5 @@
>> +#
>> +# ACPI Configuration for ARM64
>> +#
>> +config ACPI_GTDT
>> + bool
>> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
>> new file mode 100644
>> index 0000000..466de6b
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/Makefile
>> @@ -0,0 +1 @@
>> +obj-$(CONFIG_ACPI_GTDT) += acpi_gtdt.o
>> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
>> new file mode 100644
>> index 0000000..cdb2fb1
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/acpi_gtdt.c
>> @@ -0,0 +1,152 @@
>> +/*
>> + * ARM Specific GTDT table Support
>> + *
>> + * Copyright (C) 2016, Linaro Ltd.
>> + * Author: Daniel Lezcano <daniel.lezcano at linaro.org>
>> + * Fu Wei <fu.wei at linaro.org>
>> + * Hanjun Guo <hanjun.guo at linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/acpi.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +
>> +#include <clocksource/arm_arch_timer.h>
>> +
>> +#undef pr_fmt
>> +#define pr_fmt(fmt) "ACPI GTDT: " fmt
>> +
>> +typedef struct {
>> + struct acpi_table_gtdt *gtdt;
>> + void *platform_timer_start;
>> + void *gtdt_end;
>> +} acpi_gtdt_desc_t;
>> +
>> +static acpi_gtdt_desc_t acpi_gtdt_desc __initdata;
>> +
>> +static inline void *next_platform_timer(void *platform_timer)
>> +{
>> + struct acpi_gtdt_header *gh = platform_timer;
>> +
>> + platform_timer += gh->length;
>> + if (platform_timer < acpi_gtdt_desc.gtdt_end)
>> + return platform_timer;
>> +
>> + return NULL;
>> +}
>> +
>> +#define for_each_platform_timer(_g) \
>> + for (_g = acpi_gtdt_desc.platform_timer_start; _g; \
>> + _g = next_platform_timer(_g))
>> +
>> +static inline bool is_timer_block(void *platform_timer)
>> +{
>> + struct acpi_gtdt_header *gh = platform_timer;
>> +
>> + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
>> +}
>> +
>> +static inline bool is_watchdog(void *platform_timer)
>> +{
>> + struct acpi_gtdt_header *gh = platform_timer;
>> +
>> + return gh->type == ACPI_GTDT_TYPE_WATCHDOG;
>> +}
>> +
>> +static int __init map_gt_gsi(u32 interrupt, u32 flags)
>> +{
>> + int trigger, polarity;
>> +
>> + if (!interrupt)
>> + return 0;
>> +
>> + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
>> + : ACPI_LEVEL_SENSITIVE;
>> +
>> + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
>> + : ACPI_ACTIVE_HIGH;
>> +
>> + return acpi_register_gsi(NULL, interrupt, trigger, polarity);
>> +}
>> +
>> +/*
>> + * Map the PPIs of per-cpu arch_timer.
>> + * @type: the type of PPI
>> + * Returns 0 if error.
>> + */
>> +int __init acpi_gtdt_map_ppi(int type)
>> +{
>> + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
>> +
>> + switch (type) {
>> + case PHYS_SECURE_PPI:
>> + return map_gt_gsi(gtdt->secure_el1_interrupt,
>> + gtdt->secure_el1_flags);
>> + case PHYS_NONSECURE_PPI:
>> + return map_gt_gsi(gtdt->non_secure_el1_interrupt,
>> + gtdt->non_secure_el1_flags);
>> + case VIRT_PPI:
>> + return map_gt_gsi(gtdt->virtual_timer_interrupt,
>> + gtdt->virtual_timer_flags);
>> +
>> + case HYP_PPI:
>> + return map_gt_gsi(gtdt->non_secure_el2_interrupt,
>> + gtdt->non_secure_el2_flags);
>> + default:
>> + pr_err("Failed to map timer interrupt: invalid type.\n");
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * acpi_gtdt_c3stop - got c3stop info from GTDT
>> + *
>> + * Returns 1 if the timer is powered in deep idle state, 0 otherwise.
>> + */
>> +bool __init acpi_gtdt_c3stop(void)
>> +{
>> + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
>> +
>> + return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
>> +}
>> +
>> +/*
>> + * Get some basic info from GTDT table, and init the global variables above
>> + * for all timers initialization of Generic Timer.
>> + * This function does some validation on GTDT table.
>> + */
>> +int __init acpi_gtdt_init(struct acpi_table_header *table)
>> +{
>> + void *start;
>> + struct acpi_table_gtdt *gtdt;
>> +
>> + gtdt = container_of(table, struct acpi_table_gtdt, header);
>> +
>> + acpi_gtdt_desc.gtdt = gtdt;
>> + acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
>> +
>> + if (table->revision < 2) {
>> + pr_debug("Revision:%d doesn't support Platform Timers.\n",
>> + table->revision);
>> + return 0;
>> + }
>> +
>> + if (!gtdt->platform_timer_count) {
>> + pr_debug("No Platform Timer.\n");
>> + return 0;
>> + }
>> +
>> + start = (void *)gtdt + gtdt->platform_timer_offset;
>> + if (start < (void *)table + sizeof(struct acpi_table_gtdt)) {
>> + pr_err(FW_BUG "Failed to retrieve timer info from firmware: invalid data.\n");
>> + return -EINVAL;
>> + }
>> + acpi_gtdt_desc.platform_timer_start = start;
>> +
>> + return gtdt->platform_timer_count;
>> +}
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index 47352d2..108dbc3 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -205,7 +205,6 @@ config CLKSRC_MPS2
>> config ARM_ARCH_TIMER
>> bool
>> select CLKSRC_OF if OF
>> - select CLKSRC_ACPI if ACPI
>>
>> config ARM_ARCH_TIMER_EVTSTREAM
>> bool "Support for ARM architected timer event stream generation"
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 288fac5..fb8b689 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -532,6 +532,12 @@ void acpi_walk_dep_device_list(acpi_handle handle);
>> struct platform_device *acpi_create_platform_device(struct acpi_device *);
>> #define ACPI_PTR(_ptr) (_ptr)
>>
>> +#ifdef CONFIG_ACPI_GTDT
>> +int acpi_gtdt_init(struct acpi_table_header *table);
>> +int acpi_gtdt_map_ppi(int type);
>> +bool acpi_gtdt_c3stop(void);
>> +#endif
>> +
>> #else /* !CONFIG_ACPI */
>>
>> #define acpi_disabled 1
>>
>
--
Best regards,
Fu Wei
Software Engineer
Red Hat
More information about the linux-arm-kernel
mailing list