[PATCH v10 7/8] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer

[fu.wei at linaro.org]

From: Fu Wei <fu.wei at linaro.org>

The patch add memory-mapped timer register support by using the information
provided by the new GTDT driver of ACPI.

Signed-off-by: Fu Wei <fu.wei at linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 127 ++++++++++++++++++++++++++++++++++-
 1 file changed, 124 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index b10d84c..3f6a78c 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -870,7 +870,128 @@ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);
 
 #ifdef CONFIG_ACPI_GTDT
-/* Initialize per-processor generic timer */
+static struct gt_timer_data __init *arch_timer_mem_get_timer(
+						struct gt_block_data *gt_blocks)
+{
+	struct gt_block_data *gt_block = gt_blocks;
+	struct gt_timer_data *best_frame = NULL;
+	void __iomem *cntctlbase;
+	u32 cnttidr;
+	int i;
+
+	/*
+	 * According to ARMv8 Architecture Reference Manual(ARM),
+	 * the size of CNTCTLBase frame of memory-mapped timer
+	 * is SZ_4K(Offset 0x000 – 0xFFF).
+	 */
+	cntctlbase = ioremap(gt_block->cntctlbase_phy, SZ_4K);
+	if (!cntctlbase) {
+		pr_err("Failed to map mem timer control frame base address\n");
+		return NULL;
+	}
+	cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+
+	/*
+	 * Try to find a virtual capable frame. Otherwise fall back to a
+	 * physical capable frame.
+	 */
+	for (i = 0; i < gt_block->timer_count; i++) {
+		int n;
+		u32 cntacr;
+
+		n = gt_block->timer[i].frame_nr;
+
+		/* Try enabling everything, and see what sticks */
+		cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+			 CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+		writel_relaxed(cntacr, cntctlbase + CNTACR(n));
+		cntacr = readl_relaxed(cntctlbase + CNTACR(n));
+
+		if ((cnttidr & CNTTIDR_VIRT(n)) &&
+		    !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
+			best_frame = &gt_block->timer[i];
+			arch_timer_mem_use_virtual = true;
+			break;
+		}
+
+		if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
+			continue;
+
+		best_frame = &gt_block->timer[i];
+	}
+	iounmap(cntctlbase);
+
+	return best_frame;
+}
+
+static int __init arch_timer_mem_acpi_init(size_t timer_count)
+{
+	struct gt_block_data *gt_blocks;
+	struct gt_timer_data *gt_timer;
+	void __iomem *timer_cntbase;
+	int ret = -EINVAL;
+	int timer_irq;
+
+	/*
+	 * If we don't have any Platform Timer Structures, just return.
+	 */
+	if (!timer_count)
+		return 0;
+
+	/*
+	 * before really check all the Platform Timer Structures,
+	 * we assume they are GT block, and allocate memory for them.
+	 * We will free these memory once we finish the initialization.
+	 */
+	gt_blocks = kcalloc(timer_count, sizeof(*gt_blocks), GFP_KERNEL);
+	if (!gt_blocks)
+		return -ENOMEM;
+
+	if (gtdt_arch_timer_mem_init(gt_blocks) > 0) {
+		gt_timer = arch_timer_mem_get_timer(gt_blocks);
+		if (!gt_timer) {
+			pr_err("Failed to get mem timer info.\n");
+			goto error;
+		}
+
+		if (arch_timer_mem_use_virtual)
+			timer_irq = gt_timer->virtual_irq;
+		else
+			timer_irq = gt_timer->irq;
+		if (!timer_irq) {
+			pr_err("Failed to get %s irq for mem timer.",
+			       arch_timer_mem_use_virtual ? "virt" : "phys");
+			goto error;
+		}
+
+		/*
+		 * According to ARMv8 Architecture Reference Manual(ARM),
+		 * the size of CNTBaseN frames of memory-mapped timer
+		 * is SZ_4K(Offset 0x000 – 0xFFF).
+		 */
+		timer_cntbase = ioremap(gt_timer->cntbase_phy, SZ_4K);
+		if (!timer_cntbase) {
+			pr_err("Failed to map mem timer base address.\n");
+			goto error;
+		}
+
+		ret = arch_timer_mem_register(timer_cntbase, timer_irq);
+		if (ret) {
+			iounmap(timer_cntbase);
+			pr_err("Failed to register mem timer.\n");
+			goto error;
+		}
+
+		arch_counter_base = timer_cntbase;
+		arch_timers_present |= ARCH_MEM_TIMER;
+	}
+
+error:
+	kfree(gt_blocks);
+	return ret;
+}
+
+/* Initialize per-processor generic timer and memory-mapped timer(if present) */
 static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 {
 	int timer_count;
@@ -894,8 +1015,8 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 	/* Get the frequency from CNTFRQ */
 	arch_timer_detect_rate(NULL, NULL);
 
-	if (timer_count < 0)
-		pr_err("Failed to get platform timer info, skipping.\n");
+	if (timer_count < 0 || arch_timer_mem_acpi_init((size_t)timer_count))
+		pr_err("Failed to initialize memory-mapped timer, skipping.\n");
 
 	return arch_timer_init();
 }
-- 
2.5.5