[PATCH V3 3/10] Documentation: dt-bindings: firmware: tegra: add bindings of the BPMP

[Jon Hunter]

On 19/07/16 10:17, Joseph Lo wrote:
> The BPMP is a specific processor in Tegra chip, which is designed for
> booting process handling and offloading the power management, clock
> management, and reset control tasks from the CPU. The binding document
> defines the resources that would be used by the BPMP firmware driver,
> which can create the interprocessor communication (IPC) between the CPU
> and BPMP.
> 
> Signed-off-by: Joseph Lo <josephl at nvidia.com>
> ---
> Changes in V3:
> - s/mmio-ram/mmio-sram/
> - revise the file path of the reference binding documents and header files
>   for more generic viem in different SW projects
> Changes in V2:
> - update the message that the BPMP is clock and reset control provider
> - add tegra186-clock.h and tegra186-reset.h header files
> - revise the description of the required properties
> ---
>  .../bindings/firmware/nvidia,tegra186-bpmp.txt     |  77 ++
>  include/dt-bindings/clock/tegra186-clock.h         | 940 +++++++++++++++++++++
>  include/dt-bindings/reset/tegra186-reset.h         | 217 +++++
>  3 files changed, 1234 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
>  create mode 100644 include/dt-bindings/clock/tegra186-clock.h
>  create mode 100644 include/dt-bindings/reset/tegra186-reset.h

Acked-by: Jon Hunter <jonathanh at nvidia.com>

Cheers
Jon

-- 
nvpublic