[PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus

[Maxime Ripard]

Hi,

On Wed, Jul 13, 2016 at 12:01:41PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 13-07-16 10:45, Maxime Ripard wrote:
> >On Sat, Jul 09, 2016 at 10:21:55PM +0200, Hans de Goede wrote:
> >>There is a new Orange Pi PC Plus available now, rather then adding
> >>yet another dts file for this variant, extend the existing
> >>Orange Pi PC to support the sdio wifi and emmc found on this variant.
> >>
> >>Downside of this approach is the following messages in dmesg when run
> >>on the non Plus Orange Pi PC:
> >>
> >>sunxi-mmc 1c10000.mmc: fatal err update clk timeout
> >>sunxi-mmc 1c11000.mmc: smc 2 err, cmd 8, RTO !!
> >>sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> >>sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> >>sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> >>sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> >>sunxi-mmc 1c11000.mmc: smc 2 err, cmd 1, RTO !!
> >>
> >>Note these are completely harmless and there is no adverse effect
> >>to the functioning of the non Plus Orange Pi PC.
> >>
> >>Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> >>---
> >> arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 40 +++++++++++++++++++++++++++++-
> >> 1 file changed, 39 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> >>index b8340f7..f9bf260 100644
> >>--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> >>+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> >>@@ -49,11 +49,13 @@
> >> #include <dt-bindings/pinctrl/sun4i-a10.h>
> >>
> >> / {
> >>-	model = "Xunlong Orange Pi PC";
> >>+	model = "Xunlong Orange Pi PC / PC Plus";
> >> 	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
> >>
> >> 	aliases {
> >> 		serial0 = &uart0;
> >>+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
> >>+		ethernet1 = &rtl8189ftv;
> >> 	};
> >>
> >> 	chosen {
> >>@@ -118,6 +120,42 @@
> >> 	status = "okay";
> >> };
> >>
> >>+/* Note only present on orangepi pc *plus* */
> >>+&mmc1 {
> >>+	pinctrl-names = "default";
> >>+	pinctrl-0 = <&mmc1_pins_a>;
> >>+	vmmc-supply = <&reg_vcc3v3>;
> >>+	bus-width = <4>;
> >>+	non-removable;
> >>+	status = "okay";
> >>+
> >>+	/*
> >>+	 * Explicitly define the sdio device, so that we can add an ethernet
> >>+	 * alias for it (which e.g. makes u-boot set a mac-address).
> >>+	 */
> >>+	rtl8189ftv: sdio_wifi at 1 {
> >>+		reg = <1>;
> >>+	};
> >>+};
> >
> >Nothing prevents you from including the orange pi pc dts, from the
> >orange pi plus dts.
> >
> >It prevents the duplication you were trying to avoid, and it doesn't
> >create all those spurious errors and devices.
> 
> That would solve the copy paste problem on the kernel side, but that
> would still mean adding a new u-boot defconfig for this, which means that
> all the distro's which ship with prebuild u-boot binaries need to build
> for yet another board, something which I would like to avoid.

Still, registering devices that are not present on the board is not an
option.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160725/b9319e9a/attachment.sig>