[PATCH V2 00/15] a few sdhci/imx clean up and fix patches

[Ulf Hansson]

On 12 July 2016 at 09:46, Dong Aisheng <aisheng.dong at nxp.com> wrote:
> Patch 1~10 are mainly sdhci cleanup patches while patch 7,9,10
> are fixes which seems needed for stable tree as well.
>
> The main work is:
> 1) using more robust mmc_regulator_set_vqmmc
> 2) add auto retune support
> 3) improve sdhci-esdhc-imx stability
> 4) add state save and restore for low power mode
>
> Change Log:
> v1->v2:
>  * address all Andrian's comments
>  * below patches are dropped
>   mmc: sdhci: move sdhci_get_cd() forward to avoid declaration
>   mmc: core: fix a comment typo
>   mmc: sdhci: re-factor sdhci_start_signal_voltage()
>   mmc: core: mmc_regulator_set_vqmmc not return error if vqmmc/vmmc not
>     exist
>   mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch
>   mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12
>         Above clean up is not needed so far according to Andrian.
>
>   mmc: sdhci: fix incorrect get data interrupt during no data transfer
>         This one is not needed anymore cause Andrian had another fix
>         already in tree.
>         (commit 0e0a35d2d4058 mmc: sdhci: Track whether a reset is pending)
>
>   mmc: core: disable auto retune during card detection process
>         This one will sent out in another patch series to fix in CORE.
>
> v1:
> http://www.spinics.net/lists/linux-mmc/msg36316.html
>
> Dong Aisheng (15):
>   mmc: sdhci: using common mmc_regulator_set_vqmmc()
>   mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
>   mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback
>   mmc: sdhci-esdhc-imx: restore watermark level setting after resume
>   mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly
>   mmc: sdhci-esdhc-imx: support setting tuning start point
>   doc: dt: fsl-imx-esdhc: add set tuning start point binding
>   mmc: sdhci: add standard hw auto retuning support
>   mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING
>   mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING
>   mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue
>   mmc: sdhci-esdhc-imx: factor out hw related initialization into
>     function
>   mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit
>     function
>   mmc: sdhci-esdhci-imx: re-initialize hw state after resume
>   mmc: sdhci-esdhc-imx: clear tuning bits during driver probe
>
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |   2 +
>  drivers/mmc/host/sdhci-esdhc-imx.c                 | 149 ++++++++++++++-------
>  drivers/mmc/host/sdhci.c                           |  24 ++--
>  drivers/mmc/host/sdhci.h                           |   3 +
>  include/linux/platform_data/mmc-esdhc-imx.h        |   1 +
>  5 files changed, 122 insertions(+), 57 deletions(-)
>
> --
> 1.9.1
>

Thanks, applied for next!

Kind regards
Uffe