[PATCH 3/3] mmc: sunxi: Add support to the Allwinner A83T

[Jean-Francois Moine]

On Thu, 21 Jul 2016 11:18:51 +0200
Jean-Francois Moine <moinejf at free.fr> wrote:

> > On Wed, Jul 20, 2016 at 08:28:47PM +0200, Jean-Francois Moine wrote:
> > > The rate of the PLL-PERIPH clock is usually set to 1.2GHz in the A83T.
> > 
> > Uh? The datasheet says to set it to 600MHz.
> 
> Right. But the driver of the SDK for the Banana Pi M3 (A83T) sets it
> to 1.2GHz.

I tested again, and, with the pll-periph at 600MHz, both the SDcard and
the eMMC are working fine.
So, you may forget about this patch, sorry for the noise.

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/