[PATCH v3 0/4] Add STM32 Reset Driver

[Philipp Zabel]

Am Freitag, den 22.07.2016, 11:37 +0200 schrieb
gabriel.fernandez at st.com:
> From: Gabriel Fernandez <gabriel.fernandez at st.com>
> 
> v3:
>  - Use the builtin for the register
> 
> v2:
>  - switch to the non-relaxed variants
>  - describe dt-binfings in one place
> 
> The STM32 MCUs family IPs can be reset by accessing some registers
> from the RCC block.
> 
> Gabriel Fernandez (1):
>   ARM: dts: stm32f429: add missing #reset-cells of rcc
> 
> Maxime Coquelin (3):
>   dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include
>     file
>   dt-bindings: Document the STM32 reset bindings
>   drivers: reset: Add STM32 reset driver
> 
>  .../devicetree/bindings/clock/st,stm32-rcc.txt     |  42 ++++++--
>  .../devicetree/bindings/reset/st,stm32-rcc.txt     |   6 ++
>  arch/arm/boot/dts/stm32f429.dtsi                   |   1 +
>  drivers/reset/Makefile                             |   1 +
>  drivers/reset/reset-stm32.c                        | 108 +++++++++++++++++++++
>  include/dt-bindings/mfd/stm32f4-rcc.h              |  98 +++++++++++++++++++
>  6 files changed, 249 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
>  create mode 100644 drivers/reset/reset-stm32.c
>  create mode 100644 include/dt-bindings/mfd/stm32f4-rcc.h

Thank you, I've applied all four patches.

regards
Philipp