[PATCH v2 3/4] drivers: reset: Add STM32 reset driver

[Gabriel Fernandez]

Hi Paul


On 07/21/2016 09:48 PM, Paul Gortmaker wrote:
> On Thu, Jul 21, 2016 at 5:19 AM,  <gabriel.fernandez at st.com> wrote:
>> From: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>>
>> The STM32 MCUs family IPs can be reset by accessing some registers
>> from the RCC block.
>>
>> The list of available reset lines is documented in the DT bindings.
>>
>> Signed-off-by: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at st.com>
>> ---
>>   drivers/reset/Makefile      |   1 +
>>   drivers/reset/reset-stm32.c | 113 ++++++++++++++++++++++++++++++++++++++++++++
>>   2 files changed, 114 insertions(+)
>>   create mode 100644 drivers/reset/reset-stm32.c
>>
>> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
>> index 5d65a93..64ebb0c 100644
>> --- a/drivers/reset/Makefile
>> +++ b/drivers/reset/Makefile
>> @@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
>>   obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
>>   obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
>>   obj-$(CONFIG_ARCH_MESON) += reset-meson.o
>> +obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
> In my tree, this Kconfig ARCH_STM32 is a bool, so...
>
>>   obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
>>   obj-$(CONFIG_ARCH_STI) += sti/
>>   obj-$(CONFIG_ARCH_HISI) += hisilicon/
>> diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c
>> new file mode 100644
>> index 0000000..993af2a
>> --- /dev/null
>> +++ b/drivers/reset/reset-stm32.c
>> @@ -0,0 +1,113 @@
>> +/*
>> + * Copyright (C) Maxime Coquelin 2015
>> + * Author:  Maxime Coquelin <mcoquelin.stm32 at gmail.com>_
>> + * License terms:  GNU General Public License (GPL), version 2
>> + *
>> + * Heavily based on sunxi driver from Maxime Ripard.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
> ...we probably don't need module.h here or any of the other
> MODULE_<blah> tags/macros either.  Use the builtin for the
> register and all should be good.
>
> Thanks,
> Paul.
> --
Ok i will sent a v3

Thanks for reviewing !


BR
Gabriel


>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/slab.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/types.h>
>> +
>> +struct stm32_reset_data {
>> +       spinlock_t                      lock;
>> +       void __iomem                    *membase;
>> +       struct reset_controller_dev     rcdev;
>> +};
>> +
>> +static int stm32_reset_assert(struct reset_controller_dev *rcdev,
>> +                             unsigned long id)
>> +{
>> +       struct stm32_reset_data *data = container_of(rcdev,
>> +                                                    struct stm32_reset_data,
>> +                                                    rcdev);
>> +       int bank = id / BITS_PER_LONG;
>> +       int offset = id % BITS_PER_LONG;
>> +       unsigned long flags;
>> +       u32 reg;
>> +
>> +       spin_lock_irqsave(&data->lock, flags);
>> +
>> +       reg = readl(data->membase + (bank * 4));
>> +       writel(reg | BIT(offset), data->membase + (bank * 4));
>> +
>> +       spin_unlock_irqrestore(&data->lock, flags);
>> +
>> +       return 0;
>> +}
>> +
>> +static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
>> +                               unsigned long id)
>> +{
>> +       struct stm32_reset_data *data = container_of(rcdev,
>> +                                                    struct stm32_reset_data,
>> +                                                    rcdev);
>> +       int bank = id / BITS_PER_LONG;
>> +       int offset = id % BITS_PER_LONG;
>> +       unsigned long flags;
>> +       u32 reg;
>> +
>> +       spin_lock_irqsave(&data->lock, flags);
>> +
>> +       reg = readl(data->membase + (bank * 4));
>> +       writel(reg & ~BIT(offset), data->membase + (bank * 4));
>> +
>> +       spin_unlock_irqrestore(&data->lock, flags);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct reset_control_ops stm32_reset_ops = {
>> +       .assert         = stm32_reset_assert,
>> +       .deassert       = stm32_reset_deassert,
>> +};
>> +
>> +static const struct of_device_id stm32_reset_dt_ids[] = {
>> +        { .compatible = "st,stm32-rcc", },
>> +        { /* sentinel */ },
>> +};
>> +
>> +static int stm32_reset_probe(struct platform_device *pdev)
>> +{
>> +       struct stm32_reset_data *data;
>> +       struct resource *res;
>> +
>> +       data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>> +       if (!data)
>> +               return -ENOMEM;
>> +
>> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       data->membase = devm_ioremap_resource(&pdev->dev, res);
>> +       if (IS_ERR(data->membase))
>> +               return PTR_ERR(data->membase);
>> +
>> +       spin_lock_init(&data->lock);
>> +
>> +       data->rcdev.owner = THIS_MODULE;
>> +       data->rcdev.nr_resets = resource_size(res) * 8;
>> +       data->rcdev.ops = &stm32_reset_ops;
>> +       data->rcdev.of_node = pdev->dev.of_node;
>> +
>> +       return devm_reset_controller_register(&pdev->dev, &data->rcdev);
>> +}
>> +
>> +static struct platform_driver stm32_reset_driver = {
>> +       .probe  = stm32_reset_probe,
>> +       .driver = {
>> +               .name           = "stm32-rcc-reset",
>> +               .of_match_table = stm32_reset_dt_ids,
>> +       },
>> +};
>> +module_platform_driver(stm32_reset_driver);
>> +
>> +MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin at gmail.com>");
>> +MODULE_DESCRIPTION("STM32 MCUs Reset Controller Driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 1.9.1
>>