[PATCH 05/18] ARM: mvebu: a385-db-ap: add default partition description for NAND

[Grzegorz Jaszczyk]

Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
---
 arch/arm/boot/dts/armada-385-db-ap.dts | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index a18f516..6648a3f 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -182,15 +182,35 @@
 
 			nfc: flash at d0000 {
 				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
 				num-cs = <1>;
 				nand-ecc-strength = <4>;
 				nand-ecc-step-size = <512>;
 				marvell,nand-keep-config;
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition at 0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00800000>;
+						read-only;
+					};
+
+					partition at 800000 {
+						label = "uImage";
+						reg = <0x00800000 0x00400000>;
+						read-only;
+					};
+
+					partition at c00000 {
+						label = "Root";
+						reg = <0x00c00000 0x3f400000>;
+					};
+				};
 			};
 
 			usb3 at f0000 {
-- 
1.8.3.1