[PATCH v4 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
zhiyong tao
zhiyong.tao at mediatek.com
Tue Jul 19 23:02:38 PDT 2016
On Mon, 2016-07-18 at 18:12 +0100, Jonathan Cameron wrote:
> On 11/07/16 07:39, Zhiyong Tao wrote:
> > Add Mediatek auxadc driver based on iio.
> > It will register a device in iio and support iio.
> > So thermal can read auxadc channel to sample data by iio device.
> > It is tested successfully on mt2701 platform.
> > Mt8173 and mt6577 platforms are not tested.
> > But the expectation is compatible.
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
> Looks good to me. Couple of really minor points / questions inline...
>
> Just one thing to confirm... (you probably already answered this!)
> What are the units of the voltage channels?
>
> Jonathan
The units of the voltage channels are mv.
> > ---
> > drivers/iio/adc/Kconfig | 13 ++
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/mt6577_auxadc.c | 294 +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 308 insertions(+)
> > create mode 100644 drivers/iio/adc/mt6577_auxadc.c
> >
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index 25378c5..14929fc 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -305,6 +305,19 @@ config MCP3422
> > This driver can also be built as a module. If so, the module will be
> > called mcp3422.
> >
> > +config MEDIATEK_MT6577_AUXADC
> > + tristate "MediaTek AUXADC driver"
> > + depends on ARCH_MEDIATEK || COMPILE_TEST
> > + depends on HAS_IOMEM
> > + help
> > + Say yes here to enable support for MediaTek mt65xx AUXADC.
> > +
> > + The driver supports immediate mode operation to read from one of sixteen
> > + channels (external or internal).
> > +
> > + This driver can also be built as a module. If so, the module will be
> > + called mt6577_auxadc.
> > +
> > config MEN_Z188_ADC
> > tristate "MEN 16z188 ADC IP Core support"
> > depends on MCB
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > index 38638d4..8306347 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -30,6 +30,7 @@ obj-$(CONFIG_MAX1027) += max1027.o
> > obj-$(CONFIG_MAX1363) += max1363.o
> > obj-$(CONFIG_MCP320X) += mcp320x.o
> > obj-$(CONFIG_MCP3422) += mcp3422.o
> > +obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
> > obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
> > obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
> > obj-$(CONFIG_NAU7802) += nau7802.o
> > diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
> > new file mode 100644
> > index 0000000..c7cc901
> > --- /dev/null
> > +++ b/drivers/iio/adc/mt6577_auxadc.c
> > @@ -0,0 +1,294 @@
> > +/*
> > + * Copyright (c) 2016 MediaTek Inc.
> > + * Author: Zhiyong Tao <zhiyong.tao at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/io.h>
> > +#include <linux/iio/iio.h>
> > +
> > +/* Register definitions */
> > +#define MT6577_AUXADC_CON0 0x00
> > +#define MT6577_AUXADC_CON1 0x04
> > +#define MT6577_AUXADC_CON2 0x10
> > +#define MT6577_AUXADC_STA BIT(0)
> > +
> > +#define MT6577_AUXADC_DAT0 0x14
> > +#define MT6577_AUXADC_RDY0 BIT(12)
> > +
> > +#define MT6577_AUXADC_MISC 0x94
> > +#define MT6577_AUXADC_PDN_EN BIT(14)
> > +
> > +#define MT6577_AUXADC_DAT_MASK 0xfff
> > +#define MT6577_AUXADC_SLEEP_US 1000
> > +#define MT6577_AUXADC_TIMEOUT_US 10000
> > +#define MT6577_AUXADC_POWER_READY_MS 1
> > +#define MT6577_AUXADC_SAMPLE_READY_US 25
> > +
> > +struct mt6577_auxadc_device {
> > + void __iomem *reg_base;
> > + struct clk *adc_clk;
> > + struct mutex lock;
> > +};
> > +
> > +#define MT6577_AUXADC_CHANNEL(idx) { \
> > + .type = IIO_VOLTAGE, \
> > + .indexed = 1, \
> > + .channel = (idx), \
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
> > +}
> > +
> > +static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = {
> > + MT6577_AUXADC_CHANNEL(0),
> > + MT6577_AUXADC_CHANNEL(1),
> > + MT6577_AUXADC_CHANNEL(2),
> > + MT6577_AUXADC_CHANNEL(3),
> > + MT6577_AUXADC_CHANNEL(4),
> > + MT6577_AUXADC_CHANNEL(5),
> > + MT6577_AUXADC_CHANNEL(6),
> > + MT6577_AUXADC_CHANNEL(7),
> > + MT6577_AUXADC_CHANNEL(8),
> > + MT6577_AUXADC_CHANNEL(9),
> > + MT6577_AUXADC_CHANNEL(10),
> > + MT6577_AUXADC_CHANNEL(11),
> > + MT6577_AUXADC_CHANNEL(12),
> > + MT6577_AUXADC_CHANNEL(13),
> > + MT6577_AUXADC_CHANNEL(14),
> > + MT6577_AUXADC_CHANNEL(15),
> > +};
> > +
> > +static int mt6577_auxadc_read(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan)
> > +{
> > + u32 rawdata, val;
> > + void __iomem *reg_channel;
> > + int ret;
> > + struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
> > +
> > + reg_channel = adc_dev->reg_base + MT6577_AUXADC_DAT0 +
> > + chan->channel * 0x04;
> > +
> > + mutex_lock(&adc_dev->lock);
> > +
> > + val = readl(adc_dev->reg_base + MT6577_AUXADC_CON1);
> > + val &= ~(1 << chan->channel);
> > + writel(val, adc_dev->reg_base + MT6577_AUXADC_CON1);
> > +
> > + /* read channel and make sure old ready bit == 0 */
> > + ret = readl_poll_timeout(reg_channel, val,
> > + ((val & MT6577_AUXADC_RDY0) == 0),
> > + MT6577_AUXADC_SLEEP_US,
> > + MT6577_AUXADC_TIMEOUT_US);
> > + if (ret < 0) {
> > + dev_err(indio_dev->dev.parent,
> > + "wait for channel[%d] ready bit clear time out\n",
> > + chan->channel);
> > +
> > + mutex_unlock(&adc_dev->lock);
> > +
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* set bit to trigger sample */
> > + val = readl(adc_dev->reg_base + MT6577_AUXADC_CON1);
> > + val |= 1 << chan->channel;
> > + writel(val, adc_dev->reg_base + MT6577_AUXADC_CON1);
> > +
> > + /* we must delay here for hardware sample channel data */
> > + udelay(MT6577_AUXADC_SAMPLE_READY_US);
> > +
> > + /* check MTK_AUXADC_CON2 if auxadc is idle */
> > + ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, val,
> > + ((val & MT6577_AUXADC_STA) == 0),
> > + MT6577_AUXADC_SLEEP_US,
> > + MT6577_AUXADC_TIMEOUT_US);
> > + if (ret < 0) {
> > + dev_err(indio_dev->dev.parent,
> > + "wait for auxadc idle time out\n");
> > +
> > + mutex_unlock(&adc_dev->lock);
> > +
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* read channel and make sure ready bit == 1 */
> > + ret = readl_poll_timeout(reg_channel, val,
> > + ((val & MT6577_AUXADC_RDY0) != 0),
> > + MT6577_AUXADC_SLEEP_US,
> > + MT6577_AUXADC_TIMEOUT_US);
> > + if (ret < 0) {
> > + dev_err(indio_dev->dev.parent,
> > + "wait for channel[%d] data ready time out\n",
> > + chan->channel);
> > +
> > + mutex_unlock(&adc_dev->lock);
> > +
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* read data */
> > + rawdata = readl(reg_channel) & MT6577_AUXADC_DAT_MASK;
> > +
> > + mutex_unlock(&adc_dev->lock);
> > +
> > + return rawdata;
> > +}
> > +
> > +static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val,
> > + int *val2,
> > + long info)
> > +{
> > + switch (info) {
> > + case IIO_CHAN_INFO_PROCESSED:
> > + *val = mt6577_auxadc_read(indio_dev, chan);
> > + if (*val < 0) {
> > + dev_err(indio_dev->dev.parent,
> > + "failed to sample data on channel[%d]\n",
> > + chan->channel);
> > + return *val;
> > + }
> > + return IIO_VAL_INT;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static const struct iio_info mt6577_auxadc_info = {
> > + .driver_module = THIS_MODULE,
> > + .read_raw = &mt6577_auxadc_read_raw,
> > +};
> > +
> > +static int mt6577_auxadc_probe(struct platform_device *pdev)
> > +{
> > + struct mt6577_auxadc_device *adc_dev;
> > + unsigned long adc_clk_rate;
> > + struct resource *res;
> > + struct iio_dev *indio_dev;
> > + int ret;
> > + u32 val;
> > +
> > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + adc_dev = iio_priv(indio_dev);
> > + indio_dev->dev.parent = &pdev->dev;
> > + indio_dev->name = dev_name(&pdev->dev);
> > + indio_dev->info = &mt6577_auxadc_info;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->channels = mt6577_auxadc_iio_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(adc_dev->reg_base)) {
> > + dev_err(&pdev->dev, "failed to get auxadc base address.\n");
> > + return PTR_ERR(adc_dev->reg_base);
> > + }
> > +
> > + adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main");
> > + if (IS_ERR(adc_dev->adc_clk)) {
> > + dev_err(&pdev->dev, "failed to get auxadc clock\n");
> > + return PTR_ERR(adc_dev->adc_clk);
> > + }
> > +
> > + ret = clk_prepare_enable(adc_dev->adc_clk);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to enable auxadc clock\n");
> > + return ret;
> > + }
> > +
> > + adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
> > + if (!adc_clk_rate) {
> > + dev_err(&pdev->dev, "null clock rate!\n");
> > + goto err_disable_clk;
> > + }
> > +
> > + mutex_init(&adc_dev->lock);
> > +
> > + val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> > + val |= MT6577_AUXADC_PDN_EN;
> > + writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
> > + mdelay(MT6577_AUXADC_POWER_READY_MS);
> > +
> > + val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> > + if ((val & MT6577_AUXADC_PDN_EN) == 0) {
> That's a high level of paranoia... Any reason to believe this might fail?
Someone reviews the code and gives a suggestion to power off chenck.
If auxadc clk is off in the case, we can not write MT6577_AUXADC_PDN_EN
in MT6577_AUXADC_MISC. So it may cause to enable auxadc power failed.
> > + dev_err(&pdev->dev, "failed to enable auxadc power!\n");
> > + goto err_disable_clk;
> > + }
> > +
> > + platform_set_drvdata(pdev, indio_dev);
> > +
> > + ret = iio_device_register(indio_dev);
> > + if (ret < 0) {
> I'd have slightly preferred that this error unwind block was also
> moved to on a goto. Makes it easier to review as the error block then
> matches remove (with expected differences!) Really small point however.
I will update this in next version.
>
> > + dev_err(&pdev->dev, "failed to register iio device!\n");
> > + val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> > + val &= ~MT6577_AUXADC_PDN_EN;
> > + writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
> > + goto err_disable_clk;
> > + }
> > +
> > + return 0;
> > +
> > +err_disable_clk:
> > + clk_disable_unprepare(adc_dev->adc_clk);
> > + return -EINVAL;
> > +}
> > +
> > +static int mt6577_auxadc_remove(struct platform_device *pdev)
> > +{
> > + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> > + struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
> > + u32 val;
> > +
> > + iio_device_unregister(indio_dev);
> > +
> > + val = readl(adc_dev->reg_base + MT6577_AUXADC_MISC);
> > + val &= ~MT6577_AUXADC_PDN_EN;
> > + writel(val, adc_dev->reg_base + MT6577_AUXADC_MISC);
> > +
> > + clk_disable_unprepare(adc_dev->adc_clk);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id mt6577_auxadc_of_match[] = {
> > + { .compatible = "mediatek,mt2701-auxadc", },
> > + { .compatible = "mediatek,mt8173-auxadc", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6577_auxadc_of_match);
> > +
> > +static struct platform_driver mt6577_auxadc_driver = {
> > + .driver = {
> > + .name = "mt6577-auxadc",
> > + .of_match_table = mt6577_auxadc_of_match,
> > + },
> > + .probe = mt6577_auxadc_probe,
> > + .remove = mt6577_auxadc_remove,
> > +};
> > +module_platform_driver(mt6577_auxadc_driver);
> > +
> > +MODULE_AUTHOR("Zhiyong Tao <zhiyong.tao at mediatek.com>");
> > +MODULE_DESCRIPTION("MTK AUXADC Device Driver");
> > +MODULE_LICENSE("GPL v2");
> >
>
More information about the linux-arm-kernel
mailing list