[PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
Jonathan Cameron
jic23 at kernel.org
Mon Jul 18 06:18:42 PDT 2016
On 15/07/16 10:59, Quentin Schulz wrote:
> The Allwinner SoCs all have an ADC that can also act as a touchscreen
> controller and a thermal sensor. This patch adds the ADC driver which is
> based on the MFD for the same SoCs ADC.
>
> This also registers the thermal adc channel in the iio map array so
> iio_hwmon could use it without modifying the Device Tree.
>
> This driver probes on three different platform_device_id to take into
> account slight differences between Allwinner SoCs ADCs.
>
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
Hi Quentin,
Various bits inline. In particular the irq handling looks flakey / racey
to me. Definitely need some explanatory comments.
Also another note on the craziness that using extended_name to provide
the hwmon labels will cause :)
Jonathan
> ---
>
> v2:
> - add SUNXI_GPADC_ prefixes for defines,
> - correct typo in Kconfig,
> - reorder alphabetically includes, makefile,
> - add license header,
> - fix architecture variations not being handled in interrupt handlers or
> read raw functions,
> - fix unability to return negative values from thermal sensor,
> - add gotos to reduce code repetition,
> - fix irq variable being unsigned int instead of int,
> - remove useless dev_err and dev_info,
> - deactivate all interrupts if probe fails,
> - fix iio_device_register on NULL variable,
> - deactivate ADC in the IP when probe fails or when removing driver,
>
> drivers/iio/adc/Kconfig | 12 ++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/sunxi-gpadc-iio.c | 417 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 430 insertions(+)
> create mode 100644 drivers/iio/adc/sunxi-gpadc-iio.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 25378c5..184856f 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -338,6 +338,18 @@ config NAU7802
> To compile this driver as a module, choose M here: the
> module will be called nau7802.
>
> +config SUNXI_ADC
> + tristate "ADC driver for sunxi platforms"
> + depends on IIO
> + depends on MFD_SUNXI_ADC
> + help
> + Say yes here to build support for Allwinner (A10, A13 and A31) SoCs
> + ADC. This ADC provides 4 channels which can be used as an ADC or as a
> + touchscreen input and one channel for thermal sensor.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called sunxi-gpadc-iio.
> +
> config PALMAS_GPADC
> tristate "TI Palmas General Purpose ADC"
> depends on MFD_PALMAS
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 38638d4..3e60a1d 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
> obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
> obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> +obj-$(CONFIG_SUNXI_ADC) += sunxi-gpadc-iio.o
> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
> obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
> obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
> diff --git a/drivers/iio/adc/sunxi-gpadc-iio.c b/drivers/iio/adc/sunxi-gpadc-iio.c
> new file mode 100644
> index 0000000..87cc913
> --- /dev/null
> +++ b/drivers/iio/adc/sunxi-gpadc-iio.c
> @@ -0,0 +1,417 @@
> +/* ADC driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz at free-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/driver.h>
> +#include <linux/iio/machine.h>
> +#include <linux/mfd/sunxi-gpadc-mfd.h>
> +
> +#define SUNXI_GPADC_TP_CTRL0 0x00
> +#define SUNXI_GPADC_TP_CTRL1 0x04
> +#define SUNXI_GPADC_TP_CTRL2 0x08
> +#define SUNXI_GPADC_TP_CTRL3 0x0c
> +#define SUNXI_GPADC_TP_TPR 0x18
> +#define SUNXI_GPADC_TP_CDAT 0x1c
> +#define SUNXI_GPADC_TEMP_DATA 0x20
> +#define SUNXI_GPADC_TP_DATA 0x24
> +
> +/* TP_CTRL0 bits */
> +#define SUNXI_GPADC_ADC_FIRST_DLY(x) ((x) << 24) /* 8 bits */
> +#define SUNXI_GPADC_ADC_FIRST_DLY_MODE BIT(23)
> +#define SUNXI_GPADC_ADC_CLK_SELECT BIT(22)
> +#define SUNXI_GPADC_ADC_CLK_DIVIDER(x) ((x) << 20) /* 2 bits */
> +#define SUNXI_GPADC_FS_DIV(x) ((x) << 16) /* 4 bits */
> +#define SUNXI_GPADC_T_ACQ(x) ((x) << 0) /* 16 bits */
> +
> +/* TP_CTRL1 bits */
> +#define SUNXI_GPADC_STYLUS_UP_DEBOUNCE(x) ((x) << 12) /* 8 bits */
> +#define SUNXI_GPADC_STYLUS_UP_DEBOUNCE_EN BIT(9)
> +#define SUNXI_GPADC_TOUCH_PAN_CALI_EN BIT(6)
> +#define SUNXI_GPADC_TP_DUAL_EN BIT(5)
> +#define SUNXI_GPADC_TP_MODE_EN BIT(4)
> +#define SUNXI_GPADC_TP_ADC_SELECT BIT(3)
> +#define SUNXI_GPADC_ADC_CHAN_SELECT(x) ((x) << 0) /* 3 bits */
> +
> +/* TP_CTRL1 bits for sun6i SOCs */
> +#define SUNXI_GPADC_SUN6I_TOUCH_PAN_CALI_EN BIT(7)
> +#define SUNXI_GPADC_SUN6I_TP_DUAL_EN BIT(6)
> +#define SUNXI_GPADC_SUN6I_TP_MODE_EN BIT(5)
> +#define SUNXI_GPADC_SUN6I_TP_ADC_SELECT BIT(4)
> +#define SUNXI_GPADC_SUN6I_ADC_CHAN_SELECT(x) BIT(x) /* 4 bits */
> +
> +/* TP_CTRL2 bits */
> +#define SUNXI_GPADC_TP_SENSITIVE_ADJUST(x) ((x) << 28) /* 4 bits */
> +#define SUNXI_GPADC_TP_MODE_SELECT(x) ((x) << 26) /* 2 bits */
> +#define SUNXI_GPADC_PRE_MEA_EN BIT(24)
> +#define SUNXI_GPADC_PRE_MEA_THRE_CNT(x) ((x) << 0) /* 24 bits */
> +
> +/* TP_CTRL3 bits */
> +#define SUNXI_GPADC_FILTER_EN BIT(2)
> +#define SUNXI_GPADC_FILTER_TYPE(x) ((x) << 0) /* 2 bits */
> +
> +/* TP_INT_FIFOC irq and fifo mask / control bits */
> +#define SUNXI_GPADC_TEMP_IRQ_EN BIT(18)
> +#define SUNXI_GPADC_TP_OVERRUN_IRQ_EN BIT(17)
> +#define SUNXI_GPADC_TP_DATA_IRQ_EN BIT(16)
> +#define SUNXI_GPADC_TP_DATA_XY_CHANGE BIT(13)
> +#define SUNXI_GPADC_TP_FIFO_TRIG_LEVEL(x) ((x) << 8) /* 5 bits */
> +#define SUNXI_GPADC_TP_DATA_DRQ_EN BIT(7)
> +#define SUNXI_GPADC_TP_FIFO_FLUSH BIT(4)
> +#define SUNXI_GPADC_TP_UP_IRQ_EN BIT(1)
> +#define SUNXI_GPADC_TP_DOWN_IRQ_EN BIT(0)
> +
> +/* TP_INT_FIFOS irq and fifo status bits */
> +#define SUNXI_GPADC_TEMP_DATA_PENDING BIT(18)
> +#define SUNXI_GPADC_FIFO_OVERRUN_PENDING BIT(17)
> +#define SUNXI_GPADC_FIFO_DATA_PENDING BIT(16)
> +#define SUNXI_GPADC_TP_IDLE_FLG BIT(2)
> +#define SUNXI_GPADC_TP_UP_PENDING BIT(1)
> +#define SUNXI_GPADC_TP_DOWN_PENDING BIT(0)
> +
> +/* TP_TPR bits */
> +#define SUNXI_GPADC_TEMP_ENABLE(x) ((x) << 16)
> +/* t = x * 256 * 16 / clkin */
> +#define SUNXI_GPADC_TEMP_PERIOD(x) ((x) << 0)
> +
> +#define SUNXI_GPADC_ARCH_SUN4I BIT(0)
> +#define SUNXI_GPADC_ARCH_SUN5I BIT(1)
> +#define SUNXI_GPADC_ARCH_SUN6I BIT(2)
> +
> +struct sunxi_gpadc_dev {
> + void __iomem *regs;
> + struct completion completion;
> + int temp_data;
> + u32 adc_data;
> + struct regmap *regmap;
> + unsigned int fifo_data_irq;
> + unsigned int temp_data_irq;
> + unsigned int flags;
I'd prefer something more explicit than this. Right now only one
bit can ever be set - indicating a particular chip family. Why not
just have an enum instead?
> +};
> +
> +#define SUNXI_GPADC_ADC_CHANNEL(_channel, _name) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .channel = _channel, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> + .datasheet_name = _name, \
> +}
> +
> +static struct iio_map sunxi_gpadc_hwmon_maps[] = {
> + {
> + .adc_channel_label = "temp_adc",
> + .consumer_dev_name = "iio_hwmon.0",
> + },
> + { /* sentinel */ },
> +};
> +
> +static const struct iio_chan_spec sunxi_gpadc_channels[] = {
> + SUNXI_GPADC_ADC_CHANNEL(0, "adc_chan0"),
> + SUNXI_GPADC_ADC_CHANNEL(1, "adc_chan1"),
> + SUNXI_GPADC_ADC_CHANNEL(2, "adc_chan2"),
> + SUNXI_GPADC_ADC_CHANNEL(3, "adc_chan3"),
> + {
> + .type = IIO_TEMP,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + .datasheet_name = "temp_adc",
> + .extend_name = "SoC temperature",
Just curious, did you look at the resultling sysfs entries?
Going to be something like
in_temp_SoC\ Temperature_input... Not good.
If there is a strong enough reason (and there may be) to add a 'help string'
type label to struct iio_chan_spec then my only real worries would be that
we would be adding a whole pile of ABI that would be in the, near impossible
to change in future, category...
> + },
> + { /* sentinel */ },
> +};
> +
> +static int sunxi_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
> + int *val)
> +{
> + struct sunxi_gpadc_dev *info = iio_priv(indio_dev);
> + int ret = 0;
> +
> + mutex_lock(&indio_dev->mlock);
> +
> + reinit_completion(&info->completion);
> + if (info->flags & SUNXI_GPADC_ARCH_SUN6I)
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1,
> + SUNXI_GPADC_SUN6I_TP_MODE_EN |
> + SUNXI_GPADC_SUN6I_TP_ADC_SELECT |
> + SUNXI_GPADC_SUN6I_ADC_CHAN_SELECT(channel));
> + else
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1,
> + SUNXI_GPADC_TP_MODE_EN |
> + SUNXI_GPADC_TP_ADC_SELECT |
> + SUNXI_GPADC_ADC_CHAN_SELECT(channel));
> + regmap_write(info->regmap, SUNXI_GPADC_TP_INT_FIFOC,
> + SUNXI_GPADC_TP_FIFO_TRIG_LEVEL(1) |
> + SUNXI_GPADC_TP_FIFO_FLUSH);
> + enable_irq(info->fifo_data_irq);
> +
> + if (!wait_for_completion_timeout(&info->completion,
> + msecs_to_jiffies(100))) {
> + ret = -ETIMEDOUT;
> + goto out;
> + }
> +
> + *val = info->adc_data;
> +
> +out:
> + disable_irq(info->fifo_data_irq);
> + mutex_unlock(&indio_dev->mlock);
> +
> + return ret;
> +}
> +
> +static int sunxi_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
> +{
> + struct sunxi_gpadc_dev *info = iio_priv(indio_dev);
> + int ret = 0;
> +
> + mutex_lock(&indio_dev->mlock);
> +
> + reinit_completion(&info->completion);
> +
> + regmap_write(info->regmap, SUNXI_GPADC_TP_INT_FIFOC,
> + SUNXI_GPADC_TP_FIFO_TRIG_LEVEL(1) |
> + SUNXI_GPADC_TP_FIFO_FLUSH);
> + if (info->flags & SUNXI_GPADC_ARCH_SUN6I)
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1,
> + SUNXI_GPADC_SUN6I_TP_MODE_EN);
> + else
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1,
> + SUNXI_GPADC_TP_MODE_EN);
> + enable_irq(info->temp_data_irq);
Is this hardware spitting out extra irqs? If not, much better to just
leave it enabled all the time and control whether it can occur or not
by controlling the device state..
> +
> + if (!wait_for_completion_timeout(&info->completion,
> + msecs_to_jiffies(100))) {
> + ret = -ETIMEDOUT;
> + goto out;
> + }
> +
> + if (info->flags & SUNXI_GPADC_ARCH_SUN4I)
> + *val = info->temp_data * 133 - 257000;
Why report as processed? I'd just report them as raw with the scale
and offset provided. It's not a big thing, but if we can leave it so
that the conversion only occurs when desired, why not?
For in kernel users, this all happen 'automagically' anyway ;)
> + else if (info->flags & SUNXI_GPADC_ARCH_SUN5I)
> + *val = info->temp_data * 100 - 144700;
> + else if (info->flags & SUNXI_GPADC_ARCH_SUN6I)
> + *val = info->temp_data * 167 - 271000;
> +
> +out:
> + disable_irq(info->temp_data_irq);
> + mutex_unlock(&indio_dev->mlock);
mlock has a very specific purpose - locking the state changes of
between 'buffered' (push) and poll modes. Don't use it for anything else.
In fact it's almost always a bug to access it directly at all. We have
nice wrappers now for checking and locking the access mode.
Just have a local lock in your iio_priv structure.
> +
> + return ret;
> +
> +}
> +
> +static int sunxi_gpadc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_PROCESSED:
> + ret = sunxi_gpadc_temp_read(indio_dev, val);
> + if (ret)
> + return ret;
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_RAW:
> + ret = sunxi_gpadc_adc_read(indio_dev, chan->channel, val);
> + if (ret)
> + return ret;
> +
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static const struct iio_info sunxi_gpadc_iio_info = {
> + .read_raw = sunxi_gpadc_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static irqreturn_t sunxi_gpadc_temp_data_irq_handler(int irq, void *dev_id)
> +{
> + struct sunxi_gpadc_dev *info = dev_id;
> + int ret;
> +
> + ret = regmap_read(info->regmap, SUNXI_GPADC_TEMP_DATA,
> + &info->temp_data);
> + if (ret == 0)
> + complete(&info->completion);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t sunxi_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
> +{
> + struct sunxi_gpadc_dev *info = dev_id;
> + int ret;
> +
> + ret = regmap_read(info->regmap, SUNXI_GPADC_TP_DATA, &info->adc_data);
> + if (ret == 0)
> + complete(&info->completion);
if (!regmap_read(...))?
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int sunxi_gpadc_probe(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_dev *info;
> + struct iio_dev *indio_dev;
> + int ret, irq;
> + struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev;
> +
> + sunxi_gpadc_mfd_dev = dev_get_drvdata(pdev->dev.parent);
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + info = iio_priv(indio_dev);
> +
> + info->regmap = sunxi_gpadc_mfd_dev->regmap;
> + init_completion(&info->completion);
> + indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->dev.of_node = pdev->dev.of_node;
> + indio_dev->info = &sunxi_gpadc_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->num_channels = ARRAY_SIZE(sunxi_gpadc_channels);
> + indio_dev->channels = sunxi_gpadc_channels;
> +
> + info->flags = platform_get_device_id(pdev)->driver_data;
> +
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL0, SUNXI_GPADC_FS_DIV(7) |
> + SUNXI_GPADC_ADC_CLK_DIVIDER(2) | SUNXI_GPADC_T_ACQ(63));
> + if (info->flags & SUNXI_GPADC_ARCH_SUN6I)
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1,
> + SUNXI_GPADC_SUN6I_TP_MODE_EN);
> + else
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1,
> + SUNXI_GPADC_TP_MODE_EN);
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL3, SUNXI_GPADC_FILTER_EN |
> + SUNXI_GPADC_FILTER_TYPE(1));
> + regmap_write(info->regmap, SUNXI_GPADC_TP_TPR,
> + SUNXI_GPADC_TEMP_ENABLE(1) |
> + SUNXI_GPADC_TEMP_PERIOD(1953));
> +
> + irq = platform_get_irq_byname(pdev, "TEMP_DATA_PENDING");
> + if (irq < 0) {
> + dev_err(&pdev->dev,
> + "no TEMP_DATA_PENDING interrupt registered\n");
> + ret = irq;
> + goto err;
> + }
> +
> + irq = regmap_irq_get_virq(sunxi_gpadc_mfd_dev->regmap_irqc, irq);
> + ret = devm_request_any_context_irq(&pdev->dev, irq,
> + sunxi_gpadc_temp_data_irq_handler, 0,
> + "temp_data", info);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "could not request TEMP_DATA_PENDING interrupt: %d\n",
> + ret);
> + goto err;
> + }
> +
> + info->temp_data_irq = irq;
> + disable_irq(irq);
As below, I want a comment explaining why you are disabling the irq here.
This is clearly racey..
> +
> + irq = platform_get_irq_byname(pdev, "FIFO_DATA_PENDING");
> + if (irq < 0) {
> + dev_err(&pdev->dev,
> + "no FIFO_DATA_PENDING interrupt registered\n");
> + ret = irq;
> + goto err;
> + }
> +
> + irq = regmap_irq_get_virq(sunxi_gpadc_mfd_dev->regmap_irqc, irq);
> + ret = devm_request_any_context_irq(&pdev->dev, irq,
> + sunxi_gpadc_fifo_data_irq_handler,
> + 0, "fifo_data", info);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "could not request FIFO_DATA_PENDING interrupt: %d\n",
> + ret);
> + goto err;
> + }
> +
> + info->fifo_data_irq = irq;
There's a race here - this may be the only way of doing it though.
However, I want a comment explaining why here... Are we looking at a hardware
bug?
> + disable_irq(irq);
> +
> + ret = iio_map_array_register(indio_dev, sunxi_gpadc_hwmon_maps);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to register iio map array\n");
> + goto err;
> + }
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "could not register the device\n");
> + iio_map_array_unregister(indio_dev);
Once you have an unwinding path (which is sensible here) put everything in
that block - it makes it easier to review (initially I compared that block
with the remove and thought you'd missed this error path).
> + goto err;
> + }
> +
> + return 0;
> +
> +err:
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1, 0);
> + regmap_write(info->regmap, SUNXI_GPADC_TP_TPR, 0);
> +
> + return ret;
> +}
> +
> +static int sunxi_gpadc_remove(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_dev *info;
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +
> + info = iio_priv(indio_dev);
> + iio_device_unregister(indio_dev);
> + iio_map_array_unregister(indio_dev);
Slight disrepancy here between the cleanup in the error path in
probe vs what we have in remove (next line doesn't exist in probe cleanup)
Perhaps a comment here would make it clear why...
> + regmap_write(info->regmap, SUNXI_GPADC_TP_INT_FIFOC, 0);
> + regmap_write(info->regmap, SUNXI_GPADC_TP_CTRL1, 0);
> + regmap_write(info->regmap, SUNXI_GPADC_TP_TPR, 0);
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id sunxi_gpadc_id[] = {
> + { "sun4i-a10-gpadc-iio", SUNXI_GPADC_ARCH_SUN4I },
> + { "sun5i-a13-gpadc-iio", SUNXI_GPADC_ARCH_SUN5I },
> + { "sun6i-a31-gpadc-iio", SUNXI_GPADC_ARCH_SUN6I },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver sunxi_gpadc_driver = {
> + .driver = {
> + .name = "sunxi-gpadc-iio",
> + },
> + .id_table = sunxi_gpadc_id,
> + .probe = sunxi_gpadc_probe,
> + .remove = sunxi_gpadc_remove,
> +};
> +
> +module_platform_driver(sunxi_gpadc_driver);
> +
> +MODULE_DESCRIPTION("ADC driver for sunxi platforms");
> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz at free-electrons.com>");
> +MODULE_LICENSE("GPL v2");
>
More information about the linux-arm-kernel
mailing list