[PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
Jonathan Cameron
jic23 at kernel.org
Mon Jul 18 06:25:10 PDT 2016
On 15/07/16 10:59, Quentin Schulz wrote:
> The Allwinner SoCs all have an ADC that can also act as a touchscreen
> controller and a thermal sensor. For now, only the ADC and the thermal
> sensor drivers are probed by the MFD, the touchscreen controller support
> will be added later.
>
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
Hmm. Previous patch includes the header this one creates. Ordering issue?
The depends kind of prevents build failures by ensuring that can't be built
until this one is in place, but it is certainly an ugly way to do it.
Few little bits innline.
> ---
>
> v2:
> - add license headers,
> - reorder alphabetically includes,
> - add SUNXI_GPADC_ prefixes for defines,
>
> drivers/mfd/Kconfig | 14 +++
> drivers/mfd/Makefile | 2 +
> drivers/mfd/sunxi-gpadc-mfd.c | 197 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/sunxi-gpadc-mfd.h | 23 +++++
> 4 files changed, 236 insertions(+)
> create mode 100644 drivers/mfd/sunxi-gpadc-mfd.c
> create mode 100644 include/linux/mfd/sunxi-gpadc-mfd.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601..67b55d0 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -82,6 +82,20 @@ config MFD_ATMEL_FLEXCOM
> by the probe function of this MFD driver according to a device tree
> property.
>
> +config MFD_SUNXI_ADC
> + tristate "ADC MFD core driver for sunxi platforms"
> + select MFD_CORE
> + select REGMAP_MMIO
> + help
> + Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
> + This driver will only map the hardware interrupt and registers, you
> + have to select individual drivers based on this MFD to be able to use
> + the ADC or the thermal sensor. This will try to probe the ADC driver
> + sunxi-gpadc-iio and the hwmon driver iio_hwmon.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sunxi-gpadc-mfd.
> +
> config MFD_ATMEL_HLCDC
> tristate "Atmel HLCDC (High-end LCD Controller)"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 42a66e1..dcf43cd 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -201,6 +201,8 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o
> obj-$(CONFIG_MFD_RT5033) += rt5033.o
> obj-$(CONFIG_MFD_SKY81452) += sky81452.o
>
> +obj-$(CONFIG_MFD_SUNXI_ADC) += sunxi-gpadc-mfd.o
> +
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> diff --git a/drivers/mfd/sunxi-gpadc-mfd.c b/drivers/mfd/sunxi-gpadc-mfd.c
> new file mode 100644
> index 0000000..f0005a6
> --- /dev/null
> +++ b/drivers/mfd/sunxi-gpadc-mfd.c
> @@ -0,0 +1,197 @@
> +/* ADC MFD core driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz at free-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/sunxi-gpadc-mfd.h>
> +
> +#define SUNXI_IRQ_FIFO_DATA 0
> +#define SUNXI_IRQ_TEMP_DATA 1
> +
> +static struct resource adc_resources[] = {
> + {
> + .name = "FIFO_DATA_PENDING",
> + .start = SUNXI_IRQ_FIFO_DATA,
> + .end = SUNXI_IRQ_FIFO_DATA,
> + .flags = IORESOURCE_IRQ,
> + }, {
> + .name = "TEMP_DATA_PENDING",
> + .start = SUNXI_IRQ_TEMP_DATA,
> + .end = SUNXI_IRQ_TEMP_DATA,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static const struct regmap_irq sunxi_gpadc_mfd_regmap_irq[] = {
> + REGMAP_IRQ_REG(SUNXI_IRQ_FIFO_DATA, 0, BIT(16)),
> + REGMAP_IRQ_REG(SUNXI_IRQ_TEMP_DATA, 0, BIT(18)),
> +};
> +
> +static const struct regmap_irq_chip sunxi_gpadc_mfd_regmap_irq_chip = {
> + .name = "sunxi_gpadc_mfd_irq_chip",
> + .status_base = SUNXI_GPADC_TP_INT_FIFOS,
> + .ack_base = SUNXI_GPADC_TP_INT_FIFOS,
> + .mask_base = SUNXI_GPADC_TP_INT_FIFOC,
> + .init_ack_masked = true,
> + .mask_invert = true,
> + .irqs = sunxi_gpadc_mfd_regmap_irq,
> + .num_irqs = ARRAY_SIZE(sunxi_gpadc_mfd_regmap_irq),
> + .num_regs = 1,
> +};
> +
> +static struct mfd_cell sun4i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun4i-a10-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + }
> +};
> +
> +static struct mfd_cell sun5i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun5i-a13-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + },
> +};
> +
> +static struct mfd_cell sun6i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun6i-a31-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
I still really dislike using this to force the probe of that driver but
kind of up to the hwmon / mfd guys on this.
I don't have any better suggestions though..
> + },
> +};
> +
> +static const struct regmap_config sunxi_gpadc_mfd_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .fast_io = true,
> +};
> +
> +static int sunxi_gpadc_mfd_probe(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev = NULL;
> + struct resource *mem = NULL;
Neither of the above assignments is necessary as both will be explicitly
assigned before they are otherwise used.
> + unsigned int irq;
> + int ret;
> +
> + sunxi_gpadc_mfd_dev = devm_kzalloc(&pdev->dev,
> + sizeof(*sunxi_gpadc_mfd_dev),
> + GFP_KERNEL);
> + if (!sunxi_gpadc_mfd_dev)
> + return -ENOMEM;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + sunxi_gpadc_mfd_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(sunxi_gpadc_mfd_dev->regs))
> + return PTR_ERR(sunxi_gpadc_mfd_dev->regs);
> +
> + sunxi_gpadc_mfd_dev->dev = &pdev->dev;
> + dev_set_drvdata(sunxi_gpadc_mfd_dev->dev, sunxi_gpadc_mfd_dev);
> +
> + sunxi_gpadc_mfd_dev->regmap =
> + devm_regmap_init_mmio(sunxi_gpadc_mfd_dev->dev,
> + sunxi_gpadc_mfd_dev->regs,
> + &sunxi_gpadc_mfd_regmap_config);
> + if (IS_ERR(sunxi_gpadc_mfd_dev->regmap)) {
> + ret = PTR_ERR(sunxi_gpadc_mfd_dev->regmap);
> + dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
> + return ret;
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + ret = regmap_add_irq_chip(sunxi_gpadc_mfd_dev->regmap, irq,
> + IRQF_ONESHOT, 0,
> + &sunxi_gpadc_mfd_regmap_irq_chip,
> + &sunxi_gpadc_mfd_dev->regmap_irqc);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add irq chip: %d\n", ret);
> + return ret;
> + }
> +
> + if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun4i-a10-ts"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun4i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun4i_gpadc_mfd_cells), NULL,
> + 0, NULL);
> + else if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun5i-a13-ts"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun5i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun5i_gpadc_mfd_cells), NULL,
> + 0, NULL);
> + else if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun6i-a31-ts"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun6i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun6i_gpadc_mfd_cells), NULL,
> + 0, NULL);
> +
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add MFD devices: %d\n", ret);
> + regmap_del_irq_chip(irq, sunxi_gpadc_mfd_dev->regmap_irqc);
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "successfully loaded\n");
Seems like noise to me, but not my subsystem :)
> +
> + return 0;
> +}
> +
> +static int sunxi_gpadc_mfd_remove(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_mfd_dev *sunxi_gpadc_mfd_dev;
> + unsigned int irq;
> +
> + irq = platform_get_irq(pdev, 0);
> + mfd_remove_devices(&pdev->dev);
> + sunxi_gpadc_mfd_dev = dev_get_drvdata(&pdev->dev);
> + regmap_del_irq_chip(irq, sunxi_gpadc_mfd_dev->regmap_irqc);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sunxi_gpadc_mfd_of_match[] = {
> + { .compatible = "allwinner,sun4i-a10-ts" },
> + { .compatible = "allwinner,sun5i-a13-ts" },
> + { .compatible = "allwinner,sun6i-a31-ts" },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, sunxi_gpadc_mfd_of_match);
> +
> +static struct platform_driver sunxi_gpadc_mfd_driver = {
> + .driver = {
> + .name = "sunxi-adc-mfd",
> + .of_match_table = of_match_ptr(sunxi_gpadc_mfd_of_match),
> + },
> + .probe = sunxi_gpadc_mfd_probe,
> + .remove = sunxi_gpadc_mfd_remove,
> +};
> +
> +module_platform_driver(sunxi_gpadc_mfd_driver);
> +
> +MODULE_DESCRIPTION("ADC MFD core driver for sunxi platforms");
> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz at free-electrons.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/sunxi-gpadc-mfd.h b/include/linux/mfd/sunxi-gpadc-mfd.h
> new file mode 100644
> index 0000000..7155845
> --- /dev/null
> +++ b/include/linux/mfd/sunxi-gpadc-mfd.h
> @@ -0,0 +1,23 @@
> +/* Header of ADC MFD core driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz at free-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#ifndef __SUNXI_GPADC_MFD__H__
> +#define __SUNXI_GPADC_MFD__H__
> +
> +#define SUNXI_GPADC_TP_INT_FIFOC 0x10
> +#define SUNXI_GPADC_TP_INT_FIFOS 0x14
> +
> +struct sunxi_gpadc_mfd_dev {
> + struct device *dev;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *regmap_irqc;
> + void __iomem *regs;
> +};
> +
> +#endif
>
More information about the linux-arm-kernel
mailing list