[PATCH v3 2/2] drm/mediatek: set mt8173 dithering function
CK Hu
ck.hu at mediatek.com
Sun Jul 17 19:33:57 PDT 2016
Hi, Bibby:
Some comments inline.
On Thu, 2016-07-07 at 15:37 +0800, Bibby Hsieh wrote:
> Some panels only accept bpc (bit per color) 6-bit.
> But, the default bpc in mt8173 display data path is 8-bit.
> If we didn't enable dithering function to convert bpc,
> display cannot show the smooth grayscale image.
>
> In mt8173, the dithering function in OD (OverDrive) and
> GAMMA module, we have to config them with
> connector->display_mode.bpc when CRTC initial.
>
> 1. Clear the default value at *_DITHER_5 and *_DITHER_7 register.
> 2. Calculate the LSB_ERR_SHIFT bits and ADD_LSHIFT bits two values.
> i.e. Input bpc of OD is 10 bits, we assume the bpc of panel is 6-bit,
> so, we need to set 4-bit to LSB_ERR_SHIFT and ADD_LSHIFT bits respectively.
> 3. Then, set the OD or GAMMA to dithering mode depends on path-1 or path-2.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 3 +-
> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 3 +-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 21 ++++++--
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 77 +++++++++++++++++++++++----
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 6 +--
> 5 files changed, 92 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 8f62671f..019b7ca 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -103,7 +103,8 @@ static void mtk_ovl_stop(struct mtk_ddp_comp *comp)
> }
>
> static void mtk_ovl_config(struct mtk_ddp_comp *comp, unsigned int w,
> - unsigned int h, unsigned int vrefresh)
> + unsigned int h, unsigned int vrefresh,
> + unsigned int bpc)
> {
> if (w != 0 && h != 0)
> writel_relaxed(h << 16 | w, comp->regs + DISP_REG_OVL_ROI_SIZE);
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> index 5fb80cb..0df05f9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> @@ -106,7 +106,8 @@ static void mtk_rdma_stop(struct mtk_ddp_comp *comp)
> }
>
> static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> - unsigned int height, unsigned int vrefresh)
> + unsigned int height, unsigned int vrefresh,
> + unsigned int bpc)
> {
> unsigned int threshold;
> unsigned int reg;
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index ee219bb..18c9d0d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -222,7 +222,9 @@ static void mtk_crtc_ddp_clk_disable(struct mtk_drm_crtc *mtk_crtc)
> static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
> {
> struct drm_crtc *crtc = &mtk_crtc->base;
> - unsigned int width, height, vrefresh;
> + struct drm_connector *connector;
> + struct drm_encoder *encoder;
> + unsigned int width, height, vrefresh, bpc = 0;
> int ret;
> int i;
>
> @@ -234,6 +236,19 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
> height = crtc->state->adjusted_mode.vdisplay;
> vrefresh = crtc->state->adjusted_mode.vrefresh;
>
> + drm_for_each_encoder(encoder, crtc->dev) {
> + if (encoder->crtc != crtc)
> + continue;
> +
> + drm_for_each_connector(connector, crtc->dev) {
> + if (connector->encoder != encoder)
> + continue;
> + if (connector->display_info.bpc >= 3 &&
I think you should left this HW constrain in mtk_od_config() and
mtk_gamma_config(). Here just calculate the expected bpc.
> + (bpc == 0 || bpc > connector->display_info.bpc))
I think bpc should be initialized as HW default bpc and you can remove
this condiction 'bpc == 0' because we should set bpc to HW default bpc
while all connnector bpc is greater than HW default bpc.
> + bpc = connector->display_info.bpc;
> + }
> + }
> +
> ret = pm_runtime_get_sync(crtc->dev->dev);
> if (ret < 0) {
> DRM_ERROR("Failed to enable power domain: %d\n", ret);
> @@ -266,7 +281,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
> for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
> struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[i];
>
> - mtk_ddp_comp_config(comp, width, height, vrefresh);
> + mtk_ddp_comp_config(comp, width, height, vrefresh, bpc);
> mtk_ddp_comp_start(comp);
> }
>
> @@ -469,7 +484,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *ovl)
> if (state->pending_config) {
> mtk_ddp_comp_config(ovl, state->pending_width,
> state->pending_height,
> - state->pending_vrefresh);
> + state->pending_vrefresh, 0);
Why set bpc as 0 here? Maybe you have a assumption that OVL don't care
the bpc parameter. If one day OVL care it and we do not review here, the
bugs happen.
>
> state->pending_config = false;
> }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 56c5894..c10faac 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -30,7 +30,26 @@
> #define DISP_OD_INTEN 0x0008
> #define DISP_OD_INTSTA 0x000c
> #define DISP_OD_CFG 0x0020
> +#define OD_RELAYMODE BIT(0)
> +#define OD_DITHERING BIT(2)
> #define DISP_OD_SIZE 0x0030
> +#define DISP_OD_DITHER_5 0x0114
> +#define DISP_OD_DITHER_7 0x011c
> +#define DISP_OD_DITHER_15 0x013c
> +#define DITHER_LSB_ERR_SHIFT_R(x) (((x) & 0x7) << 28)
> +#define DITHER_OVFLW_BIT_R(x) (((x) & 0x7) << 24)
> +#define DITHER_ADD_LSHIFT_R(x) (((x) & 0x7) << 20)
> +#define DITHER_ADD_RSHIFT_R(x) (((x) & 0x7) << 16)
> +#define DITHER_NEW_BIT_MODE BIT(0)
> +#define DISP_OD_DITHER_16 0x140
> +#define DITHER_LSB_ERR_SHIFT_B(x) (((x) & 0x7) << 28)
> +#define DITHER_OVFLW_BIT_B(x) (((x) & 0x7) << 24)
> +#define DITHER_ADD_LSHIFT_B(x) (((x) & 0x7) << 20)
> +#define DITHER_ADD_RSHIFT_B(x) (((x) & 0x7) << 16)
> +#define DITHER_LSB_ERR_SHIFT_G(x) (((x) & 0x7) << 12)
> +#define DITHER_OVFLW_BIT_G(x) (((x) & 0x7) << 8)
> +#define DITHER_ADD_LSHIFT_G(x) (((x) & 0x7) << 4)
> +#define DITHER_ADD_RSHIFT_G(x) (((x) & 0x7) << 0)
>
> #define DISP_REG_UFO_START 0x0000
>
> @@ -44,25 +63,28 @@
>
> #define DISP_GAMMA_EN 0x000
> #define DISP_GAMMA_CFG 0x020
> +#define GAMMA_EN BIT(0)
> +#define GAMMA_LUT_EN BIT(1)
> +#define GAMMA_DITHERING BIT(2)
> #define DISP_GAMMA_SIZE 0x030
> #define DISP_GAMMA_LUT 0x700
> +#define DISP_GAMMA_DITHER_5 0x0114
> +#define DISP_GAMMA_DITHER_7 0x011c
> +#define DISP_GAMMA_DITHER_15 0x013c
> +#define DISP_GAMMA_DITHER_16 0x0140
>
> #define LUT_10BIT_MASK 0x3ff
>
> #define AAL_EN BIT(0)
>
> -#define GAMMA_EN BIT(0)
> -#define GAMMA_LUT_EN BIT(1)
> -
> -#define OD_RELAY_MODE BIT(0)
> -
> #define UFO_BYPASS BIT(2)
>
> #define COLOR_BYPASS_ALL BIT(7)
> #define COLOR_SEQ_SEL BIT(13)
>
> static void mtk_color_config(struct mtk_ddp_comp *comp, unsigned int w,
> - unsigned int h, unsigned int vrefresh)
> + unsigned int h, unsigned int vrefresh,
> + unsigned int bpc)
> {
> writel(w, comp->regs + DISP_COLOR_WIDTH);
> writel(h, comp->regs + DISP_COLOR_HEIGHT);
> @@ -76,14 +98,33 @@ static void mtk_color_start(struct mtk_ddp_comp *comp)
> }
>
> static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
> - unsigned int h, unsigned int vrefresh)
> + unsigned int h, unsigned int vrefresh,
> + unsigned int bpc)
> {
> writel(w << 16 | h, comp->regs + DISP_OD_SIZE);
> + if (bpc >= 3 && bpc < 10) {
Use symbol to replace magic number can improve the readability. For
example.
#define DITHER_MIN_BITS 3
#define DITHER_MAX_BITS 8
> + writel(0, comp->regs + DISP_OD_DITHER_5);
> + writel(0, comp->regs + DISP_OD_DITHER_7);
> + writel(DITHER_LSB_ERR_SHIFT_R(10 - bpc) |
> + DITHER_ADD_LSHIFT_R(10 - bpc) |
> + DITHER_NEW_BIT_MODE,
> + comp->regs + DISP_OD_DITHER_15);
> + writel(DITHER_LSB_ERR_SHIFT_B(10 - bpc) |
> + DITHER_ADD_LSHIFT_B(10 - bpc) |
> + DITHER_LSB_ERR_SHIFT_G(10 - bpc) |
> + DITHER_ADD_LSHIFT_G(10 - bpc),
> + comp->regs + DISP_OD_DITHER_16);
> + writel(OD_DITHERING,
> + comp->regs + DISP_OD_CFG);
> + } else {
> + writel(OD_RELAYMODE,
> + comp->regs + DISP_OD_CFG);
> + }
> +
> }
>
> static void mtk_od_start(struct mtk_ddp_comp *comp)
> {
> - writel(OD_RELAY_MODE, comp->regs + DISP_OD_CFG);
> writel(1, comp->regs + DISP_OD_EN);
> }
>
> @@ -93,7 +134,8 @@ static void mtk_ufoe_start(struct mtk_ddp_comp *comp)
> }
>
> static void mtk_aal_config(struct mtk_ddp_comp *comp, unsigned int w,
> - unsigned int h, unsigned int vrefresh)
> + unsigned int h, unsigned int vrefresh,
> + unsigned int bpc)
> {
> writel(h << 16 | w, comp->regs + DISP_AAL_SIZE);
> }
> @@ -109,9 +151,24 @@ static void mtk_aal_stop(struct mtk_ddp_comp *comp)
> }
>
> static void mtk_gamma_config(struct mtk_ddp_comp *comp, unsigned int w,
> - unsigned int h, unsigned int vrefresh)
> + unsigned int h, unsigned int vrefresh,
> + unsigned int bpc)
> {
> writel(h << 16 | w, comp->regs + DISP_GAMMA_SIZE);
> + if (bpc >= 3 && bpc < 10) {
> + writel(0, comp->regs + DISP_GAMMA_DITHER_5);
> + writel(0, comp->regs + DISP_GAMMA_DITHER_7);
> + writel(DITHER_LSB_ERR_SHIFT_R(10 - bpc) |
> + DITHER_ADD_LSHIFT_R(10 - bpc) |
> + DITHER_NEW_BIT_MODE,
> + comp->regs + DISP_GAMMA_DITHER_15);
> + writel(DITHER_LSB_ERR_SHIFT_B(10 - bpc) |
> + DITHER_ADD_LSHIFT_B(10 - bpc) |
> + DITHER_LSB_ERR_SHIFT_G(10 - bpc) |
> + DITHER_ADD_LSHIFT_G(10 - bpc),
> + comp->regs + DISP_GAMMA_DITHER_16);
> + writel(GAMMA_DITHERING, comp->regs + DISP_GAMMA_CFG);
> + }
This part is the same as mtk_od_config(), so it's better to have a
function 'mtk_dither_config()' and both mtk_od_config() and
mtk_gamma_config() call this function.
> }
>
> static void mtk_gamma_start(struct mtk_ddp_comp *comp)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 07e17fe..c7c2e92 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -65,7 +65,7 @@ struct mtk_ddp_comp;
>
> struct mtk_ddp_comp_funcs {
> void (*config)(struct mtk_ddp_comp *comp, unsigned int w,
> - unsigned int h, unsigned int vrefresh);
> + unsigned int h, unsigned int vrefresh, unsigned int bpc);
> void (*start)(struct mtk_ddp_comp *comp);
> void (*stop)(struct mtk_ddp_comp *comp);
> void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
> @@ -89,10 +89,10 @@ struct mtk_ddp_comp {
>
> static inline void mtk_ddp_comp_config(struct mtk_ddp_comp *comp,
> unsigned int w, unsigned int h,
> - unsigned int vrefresh)
> + unsigned int vrefresh, unsigned int bpc)
> {
> if (comp->funcs && comp->funcs->config)
> - comp->funcs->config(comp, w, h, vrefresh);
> + comp->funcs->config(comp, w, h, vrefresh, bpc);
> }
>
> static inline void mtk_ddp_comp_start(struct mtk_ddp_comp *comp)
More information about the linux-arm-kernel
mailing list