[PATCH] arm: dts: sun7i-a20-bananapi: name the GPIO lines

[Oleksij Rempel]

This names the GPIO lines on the Banana Pi board in accordance with
the A20_Banana_Pi v1.4 Specification.

This will make these line names reflect through to userspace
so that they can easily be identified and used with the new
character device ABI.

Some care has been taken to name all lines, not just those used
by the external connectors, also lines that are muxed into some
other function than GPIO: these are named "[FOO]" so that users
can see with lsgpio what all lines are used for.

Ps: most of the text was taken from Linux Wallej patch.

Cc: devicetree at vger.kernel.org
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Oleksij Rempel <linux at rempel-privat.de>
---
 arch/arm/boot/dts/sun7i-a20-bananapi.dts | 60 ++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 67c8a76..7529be1 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -178,6 +178,66 @@
 };
 
 &pio {
+	/*
+	 * Legend: proper name = the GPIO line is used as GPIO
+	 *         NC = not connected (not routed from the SoC)
+	 *         "[PER]" = pin is muxed for peripheral (not GPIO)
+	 *         "" = no idea, schematic doesn't say, could be
+	 *              unrouted (not connected to any external pin)
+	 *         LSEC = Low Speed External Connector
+	 *         HSEC = High Speed External Connector
+	 */
+	gpio-line-names =
+		/* PA */
+		"[ERXD3]", "[ERXD2]", "[ERXD1]", "[ERXD0]", "[ETXD3]",
+			"[ETXD2]", "[ETXD1]", "[ETXD0]",
+		"[ERXCK]", "[ERXERR]", "[ERXDV]", "[EMDC]", "[EMDIO]",
+			"[ETXEN]", "[ETXCK]", "[ECRS]",
+		"[ECOL]", "[ETXERR]", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PB */
+		"[PMU-SCK]", "[PMU-SDA]", "", "", "", "NC", "NC", "NC",
+		"NC", "[USB0-DRV]", "NC", "NC", "NC", "NC", "", "",
+		"", "", "", "", "SCL", "SDA", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PC */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PE */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PF */
+		"[SD0-D1]", "[SD0-D0]", "[SD0-CLK]", "[SD0-CMD]", "[SD0-D3]",
+			"[SD0-D2]", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PG */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PH */
+		"TXD0", "RXD0", "IO-1", "PH3", "[USB0-IDDET]", "PH5", "", "",
+		"", "", "[SD0-DET]", "", "", "", "", "",
+		"NC", "", "", "", "IO-4", "IO-5", "NC", "[EMAC-PWR-EN]",
+		"[LED1]", "NC", "NC", "NC", "", "", "", "",
+		/* PI */
+		"", "", "", "IO-GCLK", "NC", "NC", "NC", "NC",
+		"NC", "NC", "[SPI-CE0]", "[SPI-CLK]", "[SPI-MOSI]",
+			"[SPI-MISO]", "[SPI-CE1]", "NC",
+		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+
 	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
 		allwinner,pins = "PH4";
 		allwinner,function = "gpio_in";
-- 
2.7.4