[PATCH 2/2] fpga-manager: Add Socfpga Arria10 support

[atull]

On Tue, 12 Jul 2016, Moritz Fischer wrote:

> Hi Alan,
> 
> couple of nits inline below.
> 

Hi Moritz!

Thanks for your review!

> On Tue, Jul 12, 2016 at 12:07 PM, Alan Tull <atull at opensource.altera.com> wrote:
> 
> > +static int socfpga_a10_fpga_write_complete(struct fpga_manager *mgr, u32 flags)
> > +{
> > +       struct a10_fpga_priv *priv = mgr->priv;
> > +       u32 reg;
> > +       int ret;
> > +
> > +       /* Wait for pr_done */
> > +       ret = socfpga_a10_fpga_wait_for_pr_done(priv);
> > +
> > +       /* Clear pr_request */
> > +       regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
> > +                          A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST, 0);
> > +
> > +       /* Send some clocks to clear out any errors */
> > +       socfpga_a10_fpga_generate_dclks(priv, 256);
> > +
> > +       /* Disable s2f dclk and data */
> > +       regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
> > +                          A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL, 0);
> 
> Maybe replace 0 with named constant.

Generally I use named constants, but since regmap_updates_bits uses a
mask, it is clear that we're clearing the
A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL bit.


> > +static int socfpga_a10_fpga_probe(struct platform_device *pdev)
> > +{
> > +       struct device *dev = &pdev->dev;
> > +       struct a10_fpga_priv *priv;
> > +       void __iomem *reg_base;
> > +       struct resource *res;
> > +       int ret;
> > +
> > +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +       if (!priv)
> > +               return -ENOMEM;
> > +
> > +       /* First mmio base is for register access */
> > +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +       reg_base = devm_ioremap_resource(dev, res);
> > +       if (IS_ERR(reg_base))
> > +               return PTR_ERR(reg_base);
> > +
> > +       /* Second mmio base is for writing FPGA image data */
> > +       res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> > +       priv->fpga_data_addr = devm_ioremap_resource(dev, res);
> > +       if (IS_ERR(priv->fpga_data_addr))
> > +               return PTR_ERR(priv->fpga_data_addr);
> > +
> > +       /* regmap for register access */
> > +       priv->regmap = devm_regmap_init_mmio(dev, reg_base,
> > +                                            &socfpga_a10_fpga_regmap_config);
> > +       if (IS_ERR(priv->regmap))
> > +               return -ENODEV;
> > +
> > +       priv->clk = devm_clk_get(dev, NULL);
> > +       if (IS_ERR(priv->clk)) {
> > +               dev_err(dev, "no clock specified\n");
> > +               return PTR_ERR(priv->clk);
> > +       }
> > +
> > +       ret = clk_prepare_enable(priv->clk);
> > +       if (ret) {
> > +               dev_err(dev, "could not enable clock\n");
> > +               clk_put(priv->clk);
> 
> Seen that you used devm_clk_get() is this one necessary?

Yes, this is wrong.  I'll fix it.

Thanks,
Alan

> 
> > +static int socfpga_a10_fpga_remove(struct platform_device *pdev)
> > +{
> > +       struct fpga_manager *mgr = platform_get_drvdata(pdev);
> > +       struct a10_fpga_priv *priv = mgr->priv;
> > +
> > +       fpga_mgr_unregister(&pdev->dev);
> > +       clk_disable_unprepare(priv->clk);
> > +       clk_put(priv->clk);
> 
> Same here, if needed at all shouldn't it be devm_clk_put() ?
> 
> Cheers,
> 
> Moritz
>