[PATCH] dmaengine: zynqmp_dma: Fix static checker warning

[Appana Durga Kedareswara Rao]

Hi Dan,

	Thanks for the review...

> On Wed, Jul 13, 2016 at 04:12:16PM +0530, Kedareswara rao Appana wrote:
> > diff --git a/drivers/dma/xilinx/zynqmp_dma.c
> > b/drivers/dma/xilinx/zynqmp_dma.c index f777a5b..2248704 100644
> > --- a/drivers/dma/xilinx/zynqmp_dma.c
> > +++ b/drivers/dma/xilinx/zynqmp_dma.c
> > @@ -970,8 +970,13 @@ static int zynqmp_dma_chan_probe(struct
> zynqmp_dma_device *zdev,
> >  	chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL;
> >  	chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL;
> >  	err = of_property_read_u32(node, "xlnx,bus-width", &chan-
> >bus_width);
> > -	if ((err < 0) && ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
> > -			  (chan->bus_width !=
> ZYNQMP_DMA_BUS_WIDTH_128))) {
> > +	if (err < 0) {
> > +		dev_err(&pdev->dev, "missing xlnx,bus-width property\n");
> > +		return err;
> > +	}
> > +
> > +	if ((chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_64) ||
> 
> This has to be an && because it can never be both widths.  You didn't test this
> patch.  Also too many parenthesis (you're thinking of LISP).

Will fix in the next version...

> 
> > +	    (chan->bus_width != ZYNQMP_DMA_BUS_WIDTH_128)) {
> >  		dev_err(zdev->dev, "invalid bus-width value");
> >  		return err;
> 
> This has to be a negative error code.

Will fix in the next version...

Regards,
Kedar.